Abstract:Highly dispersed NiOx nanocrystals with tunable size and energy levels have been successfully synthesized and applied as hole transport layer for perovskite solar cells. Power conversion efficiency approaching 23% is achieved, together with excellent device stability under ultraviolet irradiance. Solution‐processed nickel oxide nanocrystals (NiOx NCs) ink can be facilely applied to deposit NiOx thin films as the hole transport layer (HTL) for perovskite solar cells (PSCs). Both the efficiency and stability of the corresponding PSCs depend significantly on the size and the energy levels of the as‐synthesized NiOx NCs; however, previous studies have shown that these two aspects can be hardly controlled synchronously to maximize the device performance. Herein, a novel synthesis of highly dispersed NiOx NCs is demonstrated by employing tetraalkylammonium hydroxides (TAAOHs, alkyl = methyl, ethyl, propyl, butyl) as precipitating bases, where the varied alkyl chain lengths of TAAOHs enable the size control of the NiOx NCs and the subsequent altering of their Ni3+ contents, leading to tunable energy levels of the NiOx thin films. With the longest butyl chain, the smallest crystal size and the optimal energy level alignment at the NiOx/perovskite interface are achieved. After further passivating the detrimental Ni3+ species on the surface of NiOx HTL, a remarkable power conversion efficiency (PCE) approaching 23% is obtained, which is one of the highest PCEs reported for NiOx‐based inverted PSCs. Furthermore, the unencapsulated device exhibits excellent ultraviolet stability, which maintains ≈87% of its PCE after 200 h exposure.

Zwitterion Dual-Modification Strategy for High-Quality NiOx and Perovskite Films for Solar Cells

Overcome Low Intrinsic Conductivity of NiOx through Triazinyl Modification for Highly Efficient and Stable Inverted Perovskite Solar Cells

Triple hole transporting and passivation layers for efficient NiO<sub>X</sub>-based wide-bandgap perovskite solar cells

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Triple hole transporting and passivation layers for efficient NiOX-based wide-bandgap perovskite solar cells

Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiOx /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells

Unraveling the Modification Effect at NiOx/perovskite interfaces for Efficient and Stable Inverted Perovskite Solar Cells

Tuning Surface Oxidation States of Nickel Oxide for Efficient Inverted Perovskite Solar Cells

Redox-Sensitive NiOx Stabilizing Perovskite Films for High-Performance Photovoltaics

Spontaneous decoration of ionic compounds at perovskite interfaces to achieve 23.38% efficiency with 85% fill factor in NiOX-based perovskite solar cells

An efficient and simple dual effect by under-layer abduction design for highly flexible NiOx-based perovskite solar cells

Critical Role of Removing Impurities in Nickel Oxide on High‐Efficiency and Long‐Term Stability of Inverted Perovskite Solar Cells

Overcoming Ni 3+ ‐Induced Non‐Radiative Recombination at Perovskite‐Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells

Zinc As a New Dopant for NiOx-Based Planar Perovskite Solar Cells with Stable Efficiency Near 20%

High Efficiency Inverted Planar Perovskite Solar Cells with Solution-Processed NiOx Hole Contact.

Evaporated Nickel Oxide Films with Slow Annealing and Interface Modification for Perovskite Solar Cells

High-Performance Planar Perovskite Solar Cells Using Low Temperature, Solution-Combustion-Based Nickel Oxide Hole Transporting Layer with Efficiency Exceeding 20%

NiOx Nanocrystals with Tunable Size and Energy Levels for Efficient and UV Stable Perovskite Solar Cells

Synergistic Redox Modulation for High‐Performance Nickel Oxide‐Based Inverted Perovskite Solar Modules

Dual Role of Amino-Functionalized Graphene Quantum Dots in NiOx Films for Efficient Inverted Flexible Perovskite Solar Cells

Efficient Inverted Planar Perovskite Solar Cells Using Ultraviolet/Ozone‐Treated NiOx As the Hole Transport Layer