Elemental Inter-diffusions for the Transformation of Δ/m23c6/γ Phases During Heat Treatment Processes in Heavy Gage 316H-Type Austenitic Stainless Steel
Wang, Zhiguo,Gao, Fei,Cao, Guangming,Tang, Shuai,Liu, Zhenyu
DOI: https://doi.org/10.1007/s11661-022-06695-1
2022-01-01
Metallurgical and Materials Transactions A
Abstract:The δ-ferrite and M23C6 carbide are easy to form and usually have detrimental effects on service performance in heavy gage 316H-type austenitic stainless steel. In order to clarify their transformation behavior in the austenite matrix, elemental inter-diffusions between δ/M23C6/γ phases were investigated by the in situ observation of heating and cooling processes and the concentration analysis of C, Cr, Mo and Ni elements. The M23C6-type carbides were found to precipitate preferentially along the interface between austenite and retained δ-ferrite with cooling rate of less than 100 °C/s, where the Mo, Cr and C elements were measured to be enriched and Ni element was depleted. The decomposition of M23C6 during heating at above 950 °C, on the other hand, could enhance the enrichments of Mo and Cr on the δ-ferrite side, and thus increase the difficulty of δ-ferrite dissolution. The nano-indentation tests indicated that nano-hardness values were increased sequentially for austenite, δ-ferrite and M23C6 phases with the increase of Mo, Cr and C concentrations among them. Moreover, the relative concentration difference of Mo and Cr between two phases could easily cause electrochemical corrosion, leading to preferentially corrosion in the phase with lower Mo and Cr concentration.