Abstract:Purpose The purpose of this paper is to fill the knowledge gap in the microscopic origin of high corrosion resistance in the passivated 316 L stainless steel. Design/methodology/approach Here, the pitting corrosion potential of the passivated 316 L stainless steel is measured, as well as the non-passivated one. Using the aberration-corrected scanning transmission electron microscopy, the microstructure of the passive film is unambiguously revealed. Combining the electron energy loss spectroscopy with the X-ray photoelectron spectroscopy, the depth profiling analysis is conducted and the variations in composition from the very surface of the passive film to the internal steel are clarified. Findings By optimizing the passivation treatment process, the authors significantly increase the pitting corrosion potential of the passivated 316 L stainless steel by 300 mV, compared with the non-passivated one. The passive film features a unique amorphous multilayer structure. On the basis of the depth profiling analysis, the origin of the high corrosion resistance achieved is unraveled, in which the redistribution of elements in the multilayer passive film, especially the enrichment of Cr in the topmost layer and Ni at the film-metal interface, prevent the oxidization of the inner iron of the steel. Originality/value This study advances understanding of the nature of the passive film from a microscopic view, which can be helpful for the further improvement of the corrosion resistance performance. Graphical This study introduces a model for the multilayer structure of passive films that reveals the reconstitution of the passive films after the opportune passivation treatments. Due to the redistribution of elements caused by passivation, the enrichment of Cr in the outer layer and Ni near the film-metal interface leads to enhance corrosion resistance performance.

Enhancements of Passive Film and Pitting Resistance in Chloride Solution for 316LX Austenitic Stainless Steel after Sn Alloying

Sn microalloying enhances corrosion resistance of stainless steel by accelerating heterogeneous nucleation of passive film

Electrochemical corrosion and passive behavior of a new high-nitrogen austenitic stainless steel in chloride environment

Corrosion mechanism of additively manufactured 316 L stainless steel in 3.5 wt.% NaCl solution

Passivation-induced physicochemical alterations of the native surface oxide film on 316L austenitic stainless steel

Chloride-induced alterations of the passive film on 316L stainless steel and blocking effect of pre-passivation

Effects of pack chromizing on the microstructure and anticorrosion properties of 316L stainless steel

Effect of Alloying Tin on the Corrosion Characteristics of Austenitic Stainless Steel in Sulfuric Acid and Sodium Chloride Solutions

Corrosion resistance of Cu‐bearing 316L stainless steel tuned by various passivation potentials

Effect of Sn Addition on the Corrosion Performance of Cast X-52 in H<sub>2</sub>S-Containing Environment at 60°C

Effects of SnO 2 Passive Film and Surface Micro-Galvanic Corrosion on the Corrosion Behavior of as-Extruded Mg-9Li-5Al-xSn Alloys

Investigation on Pitting Resistance of Sn-containing Ferritic Stainless Steel with Solution Simulation Method

Microscopic origin of high corrosion resistance in 316L stainless steel by acidic passivation treatments

Extraordinary pitting resistance obtained by forming a partially recrystallized microstructure in a severely deformed 316LN stainless steel

Enhanced Pitting Resistance Through Designing A High-Strength 316l Stainless Steel With Heterostructure

Synergism of alloying elements and pitting corrosion resistance of stainless steels

Passivation behavior and surface chemistry of 316 SS in the environment containing Cl− and NH4+

On the origin of passive film breakdown and metastable pitting for stainless steel 316L

Revealing the Corrosion Resistance of 316 L Stainless Steel by an In Situ Grown Nano Oxide Film

Effect of Sn Addition on the Corrosion Performance of Cast X-52 in H2S-Containing Environment at 60°C

Effect of copper addition on mechanical properties, corrosion resistance and antibacterial property of 316L stainless steel