Abstract:The interaction processes between the burning plasma and the first wall in a fusion reactor are diverse: the first wall will be exposed to extreme thermal loads of up to several tens of megawatts per square meter during quasistationary operation, combined with repeated intense thermal shocks (with energy densities of up to several megajoules per square meter and pulse durations on a millisecond time scale). In addition to these thermal loads, the wall will be subjected to bombardment by plasma ions and neutral particles (D, T, and He) and by energetic neutrons with energies up to 14 MeV. Hopefully, ITER will not only demonstrate that thermonuclear fusion of deuterium and tritium is feasible in magnetic confinement regimes; it will also act as a first test device for plasma-facing materials (PFMs) and plasma-facing components (PFCs) under realistic synergistic loading scenarios that cover all the above-mentioned load types. In the absence of an integrated test device, material tests are being performed primarily in specialized facilities that concentrate only on the most essential material properties. New multipurpose test facilities are now available that can also focus on more complex loading scenarios and thus help to minimize the risk of an unexpected material or component failure. Thermonuclear fusion—both with magnetic and with inertial confinement—is making great progress, and the goal of scientific break-even will be reached soon. However, to achieve that end, significant technical problems, particularly in the field of high-temperature and radiation-resistant materials, must be solved. With ITER, the first nuclear reactor that burns a deuterium–tritium plasma with a fusion power gain Q ≥ 10 will start operation in the next decade. To guarantee safe operation of this rather sophisticated fusion device, new PFMs and PFCs that are qualified to withstand the harsh environments in such a tokamak reactor have been developed and are now entering the manufacturing stage.

Application of Infrared Thermography in NDT of Plasma-Facing Components for Tokamaks

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

China’s Technological Achievements on ITER Enhanced Heat Flux First Wall in the Pre-Pa Qualification

A Preliminary Work on the Preparation for Neutron Irradiation of Advanced Fusion Materials Using Small Samples in China

Overview of R&D on Plasma-Facing Materials and Components in China

Infra-red thermographic inversion in ST40

Irradiation test of diagnostic components for ITER application in the Japan Materials Testing Reactor

Development and Application of Infrared Thermography Non-Destructive Testing Techniques

Challenges for plasma-facing components in nuclear fusion

Experimental Investigation on High Heat Flux Plasma Parameters of HIT-PSI Device in Argon Discharges

Neutronic Analysis of Ifmif High Flux Test Module for High Temperature Irradiation

Fully Active Cooled In-vessel Components of EAST Tokamak

Thermofluid experiments on ingress of coolant event

A comprehensive screening of plasma-facing materials for nuclear fusion

Detecting Neoclassical Tearing Modes in high-temperature ITER plasma scenarios with the ITER prototype Electron Cyclotron Emission Diagnostic

Comparative study of ITER conform tungsten grades exposed to high heat flux and neutron irradiation damage

A thorough experimental assessment of THz-TDS plasma diagnostic techniques for nuclear fusion applications

Active Infrared Thermography applied for concrete structures inspection in Nuclear Power Plants

Finite Element Simulation Analysis of Infrared Thermal Wave Detection on Composite Insulators

Induction Infrared Thermography and Thermal-Wave-Radar Analysis for Imaging Inspection and Diagnosis of Blade Composites