Abstract:Electron cyclotron emission imaging (ECEI) is employed to characterize the magneto hydraulics dynamics (MHD) fluctuations at the quiescent H-mode pedestals in DIII-D. Pedestal MHD fluctuations cause ECE radiation temperature fluctuations δTe,rad in both the pedestal and scrape-off-layer (SOL). A synthetic ECE platform is utilized for detailed interpretation of the ECEI signals in the SOL and pedestal regions. It is observed that the ECE radiation δTe,rad , which is located in the SOL region according to the cold and optically thick plasma resonance assumption, is extremely sensitive to MHD radial displacements near the separatrix, exhibiting radiation inversion to δTe,rad at the pedestal. Here, the radiation inversion refers to the opposite phase between the radiation fluctuation at the pedestal and the radiation fluctuation at the SOL. Consequently, the quasi-coherent MHD (QCM), which displays a radiation inversion, is found to be consistent with an MHD radial structure that has a strong displacement near the separatrix. In contrast, the edge harmonic oscillation (EHO), which displays weak or no inversion, is found to be consistent with an MHD radial displacement structure peaking at the pedestal top. The ECEI data, interpreted with synthetic ECE, are in qualitative agreement with beam emission spectroscopy measurements on DIII-D for the relative radial extent and localization of the EHO and QCM. The high sensitivity of ECE radiation to separatrix displacements can be used to detect turbulence or MHD fluctuations near the separatrix, which may affect the transport across the separatrix and the wetted area in the divertor. The δTe,rad inversion measured with an ECE or ECEI system potentially provides important information on the magnetic field Bsep at the separatrix, which helps constrain the pedestal equilibrium reconstruction and achieve an unambiguous mapping of the ECE/ECEI system with respect to the separatrix.

Detecting Neoclassical Tearing Modes in high-temperature ITER plasma scenarios with the ITER prototype Electron Cyclotron Emission Diagnostic

Electron cyclotron emission detection of neoclassical tearing modes for control for ITER

Microwave Diagnostics System in the HL-2A Tokamak

Optical Design and Synthetic Analysis of the Electron Cyclotron Emission Imaging Diagnostic of HL-2M Tokamak

Oblique electron-cyclotron-emission radial and phase detector of rotating magnetic islands applied to alignment and modulation of electron-cyclotron-current-drive for neoclassical tearing mode stabilization

Design of the 2D Electron Cyclotron Emission Imaging Instrument for the J-TEXT Tokamak.

Laser and microwave instrumentation for ITER and future reactors

Analysis of synthetic electron cyclotron emission from the high field side of HL-2M tokamak plasmas

Development of ECE/ECEI Diagnostics and MHD-related Studies on HL-2A Tokamak

Concept of a Diagnostic System for Measuring the Electron Temperature Profile of Plasma from the Intensity of Electron Cyclotron Emission for the TRT Facility

Electron Kinetic Effects on Optical Diagnostics in Fusion Plasmas

Synthetic Diagnostic for Electron Cyclotron Emission Imaging.

Control System of Neoclassical Tearing Modes in Real Time on HL-2A Tokamak

Non-linear simulations of neoclassical tearing mode control by externally driven RF current and heating, with application to ITER

Feasibility of a collective Thomson scattering diagnostic for burning plasma control on DEMO

One-Dimensional Vertical Electron Cyclotron Emission Imaging Diagnostic for HT-7 Tokamak

Non-disruptive error field measurement in DIII-D low safety factor plasmas and projection to ITER

One-Dimensional Vertical ECEI Diagnostic for HT-7 Tokamak

Modelling and experiment to stabilize disruptive tearing modes in the ITER baseline scenario in DIII-D

ECEI characterization of pedestal fluctuations in quiescent H-mode plasmas in DIII-D

Use of differential plasma rotation to prevent disruptive tearing mode onset from 3-wave coupling