Abstract:This paper investigates the conducted electromagnetic interference (EMI) characteristics of an on-board multiplexing converter that utilizes paralleled silicon carbide (SiC) devices to achieve high efficiency and high-power density for the application in electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs). The multiplexing converter can operate as a three-phase interleaved DC/DC converter with a peak output power of 60 kW or an integrated two-stage non-isolated on-board charger (OBC) with an output power of 6.6 kW. The novelty of this paper is that it reveals that in the DC/DC mode the series resonance between the input negative lead parasitic inductance and the high frequency transmission line effects of the input power inductor will increase the conducted EMI levels, which can be mitigated by optimizing the winding methods of the power inductor or by adding a small capacitor, and reveals that in the non-isolated OBC mode the shielded cable on the battery-side will increase the grid-side EMI in the low frequency ranges, which can be suppressed by integrated installation of EMI filters without affecting the system power density. Firstly, parasitic parameters of the components of the multiplexing converter, such as the power inductors, the SiC MOSFETs and the shielded cables, are extracted and validated with impedance measurements, and the corresponding equivalent circuit models are established. Then, the conducted EMI simulation models of the multiplexing converter in different working modes are established. The influence of different interference sources and different parasitic parameters on the system EMI characteristics are analyzed, and the effective EMI suppression measures are given without affecting the system power density. Finally, the conducted EMI characteristics of the multiplexing converter and the effectiveness of the proposed EMI suppression measures are tested and verified through experiments.

Conducted EMI Estimation on GaN Step-up Resonant Converter for Electric Propulsion System

A Tri-Slope Gate Driving GaN DC–DC Converter with Spurious Noise Compression and Ringing Suppression for Automotive Applications

25.2 A 10mhz 3-to-40v VIN Tri-Slope Gate Driving GaN DC-DC Converter with 40.5dbµv Spurious Noise Compression and 79.3% Ringing Suppression for Automotive Applications

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

A GaN Totem-Pole PFC Converter with Zero-Voltage-Switching PWM Control

A High Frequency High Efficiency GaN Based Bi-Directional 48V/12V Converter with PCB Coupled Inductor for Mild Hybrid Vehicle

Common-Mode Noise Analysis and Suppression of a GaN-Based LCLC Resonant Converter for Ion Propulsion Power Supply

Modeling and Suppression of Common-Mode Electromagnetic Interference in GaN-Based LLC Converter

Mitigation of Deane and Hamill phenomenon in gallium nitride high‐voltage power supply for electric propulsion system application

A 1-MHz GaN-Based LCLC Resonant Step-Up Converter with Air-Core Transformer for Satellite Electric Propulsion Application

Emi Modeling And Experiment Of A Gan Based Llc Half-Bridge Converter

Current Zero-Crossing Duration Reduction of a Semicontrolled Open-Winding PMSG System Based on Third Harmonic Current Injection

Analysis and Comparison of the Radiated Electromagnetic Interference Generated by Power Converters With Si MOSFETs and GaN HEMTs

Control Integrated Studies on High Speed Permanent Magnetic Generators System

Virtual Prototype and GaN HEMT Based High Frequency LLC Converter Design

Accurate Evaluation of Commutations of 650 V GaN Power Switches Assisted by Electromagnetic Simulations in a 7 kW Dual Active Bridge Converter for Automotive Battery Charging Applications

Modeling and Prediction of Common-Mode Electromagnetic Interference for GaN-Based LLC Resonant Converters

Conducted EMI Investigation of a SiC-Based Multiplexing Converter for EV/PHEV

EMI Prediction and Filter Design for MHz GaN Based LLC Half-Bridge Converter

External Magnetic Field Minimization for the Integrated Magnetics in Series Resonant Converter

EMI Noise Reduction in GaN-based Full-bridge LLC Converter