Abstract:Currently, there are various types of microscales and the conventional line detection system usually has only one detection method, which is difficult to adapt to the diverse calibration needs of microscales. This article investigates the high-precision measurement method of a microscale based on optoelectronics and the image integration method to solve the diversified calibration needs of microscales. The automatic measurement and processing system integrates two methods: the photoelectric signal measurement method and the photoelectric image measurement method. This article studies the smooth motion method based on ordinary linear guides, investigates the method of reducing the cosine error of a small-range interference length measurement, proposes an image-based line positioning method, and studies the edge and center recognition algorithms of the line. According to the experimental data, the system's measurement accuracy was analyzed using the photoelectric signal measurement method to measure the 1 mm microscale, the maximum difference from the reference value was 0.105 μm, the standard uncertainty was 0.068 μm, and the absolute value of normalized error was less than 1. The accuracy of the image measurement method to measure the 1 mm microscale was consistent with that of the photoelectric signal method. The results show good consistency in the measurement results between the two methods of the integrated measurement system. The photoelectric signal method has the technical characteristics of high measurement efficiency and high accuracy, while the pixel-based measurement of the image method has two-dimensional measurement characteristics, which can realize measurements that cannot be realized by the photoelectric signal method; therefore, the measurement system of optoelectronics and image integration is characterized by high precision and a wide range of measurement adaptations.

&Lt;title>ccd-Based Microscopic Measurement System for Precision Part Geometry Error</title>

Machining Precision Online Measurement of Large Span Pin Hole Using Structured Light

On-line Qualification of a Micro Probing System for Precision Length Measurement of Micro-Features on Precision Parts

Distance Measuring Using Single-Point Laser Triangulation System Design Based on CMOS

Error Correction Of Laser Scanning System For Reverse Engineering

Measurement of tiny-size clearance based on CCD image measurement

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Design of Non-contact Automatic Measurement System

Design of High Precision Image Measurement System for Small Workpiece

A micro cutter auto-alignment system with on-machine positioning error measurement and compensation methods

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

High-Precision Measurement of Microscales Based on Optoelectronics and Image Integration Method

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Full-scale Measurement of CNC Machine Tools

An New Instrument for Measuring Mechanical Compliance of Micro-Systems

Research on Measurement of On-Line Laster Coaxality Error for Rotary Parts

Area CCD-Based High Accuracy Measurement Technology and Its Application

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

Error Modeling and Identification Technology for Circular Path of NC Machine Tools

Volumetric error identification for CNC machine tool based on multi-body system and vector diagonal measurement

3D Measurement System of Micro-Organization Based on Two-Ray-path Scanning

&Lt;title&gt;ccd-Based Microscopic Measurement System for Precision Part Geometry Error&lt;/title&gt;