Abstract:It becomes more and more important to search for a suitable process window for CD-R production because CD-R's performance will vary with the thickness of the recording material (dye layer). With the development of CD-R writer, it is strongly recommended that CD-R should be compliance with multi-speed recording strategy. For different kinds of dyes, we need to re-design the pre-groove geometry of stampers and dye/solvent formulation for getting good CD-R's performance. In the meanwhile we need to use different methods to search for the process window according to the characteristics of the dye. For the Irgaphor Green phthalocyanine dye, BLER will increase with the reducing thickness of the dye layer at lower writing speeds; Jitter will increase with increasing thickness of the dye layer at high writing speeds. So we define the process window as the optical density when BLER is 100 at low writing speed and L3T Jitter is 35 ns at high writing speed. For the Irgaphor Supergreen phthalocycnine dye, BLER is not sensitive to the thickness of dye layer and normally I11 is too low at lower writing speeds. After finalizing a stamper, we increase I11 by increasing the thickness of the dye layer and decrease L3T jitter by decreasing the thickness of dye layer. So we define the process window as the optical density when I11 is 0.58 V at low writing speed and L3T Jetter is 35 ns at high writing speed. The temperature and humidity have certain effect on the dye layer thickness, the process control is benefited by the wider process window. Using the above methods, we could easily establish the CD-R process window and set the optimum dye layer thickness during the CD-R production with the Ciba phthalocyanine dyes.

&Lt;title>searching for CD-R Process Window for Different Phthalocyanine Dyes</title>

High speed recording property of phthalocyanine thin film for compact disc recordable

Novel Phthalocyanine Thin Film for Compact Disc Recordable

The Optical Storage Performance Of A Cyanine Film Prepared By Spin-Coating Process

Properties of a cyanine dye for high-density digital versatile disk-recording (DVD-R)

Thermal and optical properties of cyanine dye for high density digital versatile disc-recordable (DVD-R)

Optical and Thermal Properties of a Cyanine Dye Medium for Next-Generation DVD-Rs

Optimizing film design and its application for the recordable compact disk developed by two cyanine dye samples

Optical And Thermal Properties Of Some Indolenine Cyanine Dyes Used As Optical Recording Materials

Application of subphthalocyanine thin films in high-density optical recording

Dynamic crystallization behavior of phase change optical recording in erasing process

Optical Density Curve Model for CD-R Dye Coating

Achieve both multi-wavlength and multi-level optical storage on compact disc by diarylethene

Researches on organic recording materials for blue laser recordable disc

Optical Recording Properties of a Novel Subphthalocyanine Thin Film

Improved Mastering Material for Multilevel Blue Laser Disc.

Achieve Both Multiwavelength and Multilevel Optical Storage on Compact Disk by Diarylethene

Investigation on Super-Resolution Near-Field Blu-Ray-Type Phase-Change Optical Disk with Sb<sub>2</sub>Te<sub>3</sub> Mask Layer

Methods Of Controlling Grooves Profile And The Duty Cycle Of Goad Transmission Phase Gratings - Art. No. 68322l

Controlling the efficient and ultralong room-temperature phosphorescence of 9H-dibenzo[a,c]carbazole derivatives for erasable light printing

Super-Resolution Near-Field Phase Change Disk with Sb70Te30 Mask Layer

&Lt;title&gt;searching for CD-R Process Window for Different Phthalocyanine Dyes&lt;/title&gt;