Abstract:It becomes more and more important to search for a suitable process window for CD-R production because CD-R's performance will vary with the thickness of the recording material (dye layer). With the development of CD-R writer, it is strongly recommended that CD-R should be compliance with multi-speed recording strategy. For different kinds of dyes, we need to re-design the pre-groove geometry of stampers and dye/solvent formulation for getting good CD-R's performance. In the meanwhile we need to use different methods to search for the process window according to the characteristics of the dye. For the Irgaphor Green phthalocyanine dye, BLER will increase with the reducing thickness of the dye layer at lower writing speeds; Jitter will increase with increasing thickness of the dye layer at high writing speeds. So we define the process window as the optical density when BLER is 100 at low writing speed and L3T Jitter is 35 ns at high writing speed. For the Irgaphor Supergreen phthalocycnine dye, BLER is not sensitive to the thickness of dye layer and normally I11 is too low at lower writing speeds. After finalizing a stamper, we increase I11 by increasing the thickness of the dye layer and decrease L3T jitter by decreasing the thickness of dye layer. So we define the process window as the optical density when I11 is 0.58 V at low writing speed and L3T Jetter is 35 ns at high writing speed. The temperature and humidity have certain effect on the dye layer thickness, the process control is benefited by the wider process window. Using the above methods, we could easily establish the CD-R process window and set the optimum dye layer thickness during the CD-R production with the Ciba phthalocyanine dyes.

Optical Density Curve Model for CD-R Dye Coating

Study and Application of Optical Density Curve Model for Recordable Disc

Mechanics Analysis in Cd-R Dye Coating Process

FLOW ANALYSIS IN DYE COATING PROCESS OF RECORDABLE OPTICAL DISC

Evaporation and Flow in the Dye Coating Process

Optimizing film design and its application for the recordable compact disk developed by two cyanine dye samples

Optical And Thermal Properties Of Some Indolenine Cyanine Dyes Used As Optical Recording Materials

Thermal and optical properties of cyanine dye for high density digital versatile disc-recordable (DVD-R)

Properties of a cyanine dye for high-density digital versatile disk-recording (DVD-R)

The Optical Storage Performance Of A Cyanine Film Prepared By Spin-Coating Process

Effects of Pattern Parameters on the Optical Disk Readout Signals

Readout Modeling And Calculation For Photochromic Optical Storage

Modeling and process of mastering for multi-level run-length-limited optical discs

Optical and Thermal Properties of a Cyanine Dye Medium for Next-Generation DVD-Rs

Theoretical And Experimental Study Of Readouts Of Photochromic Optical Disks

A Data-Analysis Method Of Dvd Disc Parameters Affected By Replication Process

Application of Coupled-Wave Theory in Optical Disk

The Theoretical Consideration of the Readout System for the Photochromic Optical Disk

&Lt;title>searching for CD-R Process Window for Different Phthalocyanine Dyes</title>

Study on optical storage performance of a cyanine-polymer film

A deep investigation into the structure of carbon dots