Abstract:In order to study the mechanical properties of seawater sea sand concrete and the durability damage law of seawater sea sand concrete under the action of seawater erosion, corresponding specimens were prepared and subjected to cube compressive strength, flexural strength, and dry-wet cycle tests by taking the volume dosage of glass fibers and polyvinyl alcohol fibers as variables. The test combined SEM scanning and EDS to analyze the microstructure of fiber-reinforced seawater sand concrete, and established a model based on the two-parameter Weibull probability distribution. The results show that the fiber has a significant effect on improving the mechanical properties and erosion resistance of seawater sand concrete. When the total volume content is 0.3% and the mixing ratio is 1:1, the improvement effect is the best. The maximum increase in cubic compressive strength was 24.2%; the maximum increase in flexural strength was 38.8%. After the specimens were subjected to wet and dry cycles for 360d, the maximum reduction in mass loss rate was 41.23%; the maximum reduction in strength loss rate was 27.55%. As observed from the microscopic images, the main disadvantage of SSC is that the salt crystallization and swelling matter produced by the erosion ions will weaken the bond between aggregate and mortar, resulting in defects in the interfacial transition zone (ITZ). Under the action of dry-wet cycles, the alternating dry-wet forces, the expansion pressure generated by expansive substances and the crystallization pressure generated by salt crystallization will change the microstructure, and therefore the damage of the specimen will deepen with the extension of erosion time. The microscopic images also show that the doping fibers can improve the internal integrity and compactness of the matrix, thus significantly improving the mechanical properties and durability of seawater sea sand concrete. In this test, a damage model was established based on the two-parameter Weibull distribution model, and the damage law between strength loss and dry-wet cycles was fitted, which provides a favorable basis to study the damage of seawater sea sand concrete under wet-dry cycling.

Mechanical Properties of Seawater-Mixed Steel Fiber Reinforced Concrete

Effects of Natural Seawater and Sea Sand on the Compressive Behaviour of Unconfined and Carbon Fibre-Reinforced Polymer-Confined Concrete

Mechanical Properties of Fibre Reinforced Seawater Sea-Sand Recycled Aggregate Concrete Under Axial Compression

Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete

Feasibility of using Waste Brine/Seawater and Sea Sand for the Production of Concrete: An Experimental Investigation from Mechanical Properties and Durability Perspectives

Durability of BFRP bars and BFRP reinforced seawater sea-sand concrete beams immersed in water and simulated seawater

Long-term performance of fiber reinforced cementitious composites with high ductility under seawater attack with different salinities

Experimental and statistical study of mechanical and durability properties of self-compacting concrete using seawater for making and curing

Mechanical properties, flexural behavior, and chloride permeability of high-performance steel fiber-reinforced concrete (SFRC) modified with rice husk ash and micro-silica

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Study on mechanical properties and anti-erosion performance of fiber reinforced seawater sea sand concrete

Research on the performance of seawater sea-sand concrete: A review

Effect of Seawater on Hydration and Sulfate Resistance of Noncement Mortars

Effect of Steel Fiber on Mechanical Properties and Microstructure of Magnesium Phosphate Cement-Based Concrete Exposed to Water and Sulfate Attack

Durability of SFCB Reinforced Low-Alkalinity Seawater Sea Sand Concrete Beams in Marine Environment

Review of the Properties of Fiber-Reinforced Polymer-Reinforced Seawater–Sea Sand Concrete

Fracture Mechanical Properties of Steel Fiber Reinforced Self-Compacting Concrete under Dry–Wet Cycle Sulfate Attack

The durability of seawater sea-sand concrete beams reinforced with metal bars or non-metal bars in the ocean environment

Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete

Durability of CFRP-confined seawater sea-sand concrete (SSC) columns under wet-dry cycles in seawater environment

Evaluating mechanical, microstructural and durability performance of seawater sea sand concrete modified with silica fume