Mechanical Properties of Fibre Reinforced Seawater Sea-Sand Recycled Aggregate Concrete Under Axial Compression

Yijie Huang,Tongcheng Wang,Hongli Sun,Chuanxi Li,Lei Yin,Qing Wang
DOI: https://doi.org/10.2139/ssrn.3979961
2021-01-01
SSRN Electronic Journal
Abstract:This study investigates the mechanical properties of fibre reinforced seawater sea-sand recycled aggregate concrete (SSRAC). A total of 252 concrete specimens, considering four different variables—the type of concrete (SSRAC, recycled aggregate concrete and ordinary concrete), age (day 7, 14 and 28), fibre type (polypropylene and stainless steel fibres) and content—were fabricated. The macro properties and mechanical mechanism of discrete fibre reinforced SSRAC were systematically studied through a novel experimental system involving axial compression test and digital speckle correlation method (DSCM). The failure pattern, strength, ductility, stress-strain curve, deformation filed, crack initiation and propagation of fibre reinforced SSRAC were analysed. The test results show that the failure pattern of specimen changed with the fibre type used. The compressive and splitting tensile strengths of SSRAC increased with an increase in polypropylene fibre (PF) content, while the optimal stainless steel fibres (SSF) content for SSRAC was 1.0% by volume content of concrete. Moreover, the typical influence of PF on the elastic modulus of SSRAC was negative but SSF could greatly improve that of specimen. The axial stress-strain curve of fibre reinforced SSRAC consisted of elastic, elastic-plastic ascending and declining stages. Increasing SSF and PF contents decreased the curve curvature while increased the ductility and peak stain, and the descending branch of curve tended to be smooth. Generally, the effects of fibres on the crack initiation of SSRAC and the distributions of deformation field and cracks were negligible compared to coarse aggregates, while the crack propagation of SSRAC significantly changed with the variations in fibre type and content. The cracks and high-value strain of SSF reinforced SSRAC developed slowly compared to plain SSRAC and PF reinforced SSRAC. Finally, an analytical stress-strain model of fibre reinforced SSRAC considering the coupled effects of various variables was proposed, which can be used to conduct an theoretical evaluation and design of the marine structures.
What problem does this paper attempt to address?