Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

Evaluating mechanical, microstructural and durability performance of seawater sea sand concrete modified with silica fume

Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete

Effect of Dosage of Silica Fume on the Macro-Performance and Micro/nanostructure of Seawater Portland Cement Pastes Prepared with an Ultra-Low Water-to-binder Ratio

Workability, strength, and shrinkage of ultra-high-performance seawater, sea sand concrete with different OPC replacement ratios

Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete

Mechanical properties, flexural behavior, and chloride permeability of high-performance steel fiber-reinforced concrete (SFRC) modified with rice husk ash and micro-silica

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Mock-up pragmatic study on the impact performance of self-compacting concrete incorporating sea sand

Experimental Investigation of Electrochemical Corrosion and Chloride Penetration of Concrete Incorporating Colloidal Nanosilica and Silica fume

Experimental and statistical study of mechanical and durability properties of self-compacting concrete using seawater for making and curing

Performance assessment of seawater fly ash cement paste with integrated physicochemical- geochemical simulation platform and experimental validation

Examination of Halfway Substitution of Cement M20 Concrete with Silica Rage and Quartz Sand in Fine Total

Developing a sustainable concrete incorporating bentonite clay and silica fume: Mechanical and durability performance

Spent Foundry Sand (SFS)-Gum Arabic Admixed Concrete: X-Ray Diffraction, Microstructure, Acid and Sulphate Analysis

The impact of supplementary cementitious materials on the rheological and mechanical properties of mortars based on quarry waste sand

Compressive Behavior and Microstructure of Concrete Mixed with Natural Seawater and Sea Sand

Research on the performance of seawater sea-sand concrete: A review

Sulfate Resistance of Eco-Friendly and Sulfate-Resistant Concrete Using Seawater Sea-Sand and High-Ferrite Portland Cement

Strength, hydration, and microstructure of seawater sea-sand concrete using high-ferrite Portland cement

Enhancing Marine Anti-Washout Concrete: Optimal Silica Fume Usage for Improved Compressive Strength and Abrasion Resistance

Mechanical and microstructure performance and global warming potential of blended concrete containing rice husk ash and silica fume