Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Development of an Approach to Measure the Inner Wall Temperature of a Tubular Window for Experiments of Two-Phase Flow Heat Transfer on the China Space Station

Tube Inside Translucent Platinum Film with the Function of Temperature Measurement for Heating Window Applications

Experimental Verification and Improvement of Heat Transfer Tube Local Wall Temperature Measurement Method

A Visual Experimental Study on Surface Temperature Field in Stainless Steel Microtube

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

An Experimental Investigation of Single-Phase Heat Transfer in 0.045mm to 0.141mm Microtubes

Experimental measurement of inner wall average temperature of microtubes

An Experimental Investigation on Axial Heat Flux of Wall in Microtubes

Optimal Design of Wall Temperature Measurement for Microchannel Flat Tube Based on Resistance Temperature Detector

INVESTIGATION ON THE TUBE WALL TEMPERATURE AND CRITICAL HEAT FLUX FOR HIGH PRESSURE STEAM-WATER TWO-PHASE FLOW IN INTERNALLY RIBBED TUBES

Experimental Study on Flow and Heat Transfer in a 19.6-Μm Microtube

Experimental Study on Temperature Distribution of Double-Layer Solid Cylinder under Local Heating Source

Numerical Studies of Simultaneously Developing Laminar Flow and Heat Transfer in Microtubes with Thick Wall and Constant Outside Wall Temperature

Design and Exploration of Experimental Device for Heat Transfer of Low Temperature Fluid Outside the Tube

Investigation on the Heat Transfer Characteristics of the Steam-Water Two-Phase Flow in the Inclined Upward Smooth Tube in Sub-Critical and Near Critical Pressure Regions

An Experimental Study of Flow and Heat Transfer in a 19.6μm Inner Diameter Quartz Microtube

Experimental Study of Developing Convective Heat Transfer in a Multiport Microchannel Flat Tube

Flow Visualization and Local Measurement of Forced Convection Heat Transfer in a Microtube

Experimental Investigations on Boiling Heat Transfer Inside Miniature Circular Tubes Immersed in FC-72

Flow and Heat Transfer in 0.0196mm Quartz Microtube

Experimental Study on Single- to Two-Phase Flow and Heat Transfer of Water in a Small Tube