Abstract:Oxide dispersion strengthened (ODS) steels are promising materials for high temperature applications, in particular in fission and fusion nuclear reactors. In comparison to common reduced activation ferritic/martensitic steels they exhibit better resistance to neutron irradiation and creep owing to an uniform dispersion of nano-oxides particles (~5 nm) and a very fine grain structure (~500 nm). ODS steels are commonly prepared by high-energy mechanical alloying (HEMA) of a mixture of steel powder and Y2O3 particles followed by a consolidation stage consisting of hot extrusion (HE) or hot isostatic pressing (HIP). The samples are then submitted to annealing around 1100°C for 1-2 hours. Recently, the present authors proposed a novel method based on low-energy mechanical alloying (LEMA). In general ODS microstructure is quite complex and several mechanisms contribute to the mechanical strengthening with different effects depending on the temperature. The present work analyses the role played by each single mechanism at increasing temperature by considering the specific microstructural features. ODS steels prepared through different routes and process parameters display different grain size distribution and homogeneity of particles dispersion, factors which strongly affect the mechanical properties. Yield stress values measured in tensile tests performed at increasing temperature up to 700°C, either taken from literature or achieved by authors, have been examined and the following strengthening mechanisms have been considered to fit the experimental data: (i) solid solution; (ii) Bailey-Hirsch; (iii) Hall-Petch; (iv) Orowan; (v) Coble creep and (vi) Arzt-Rősler-Wilkinson. The analyses evidence advantages and drawbacks of different preparation routes and suggest some criteria for further improving the mechanical properties of these materials.

A Novel Method for Preparing ODS Steel Using Precursor Powder Combining with Sub-Rapid Solidification

Mechanical Properties and Microstructure of 9Cr-Ods-clf-1 Steel

Manufacturing Oxide Dispersion Strengthened (ODS) Steel Plate via Cold Spray and Friction Stir Processing

Microstructure Evolution and Mechanical Properties of a High Cr Oxide Dispersion-Strengthened Steel through STARS Route Followed by Hot Isostatic Pressing

Enhancement of FeCrAl-ODS steels through optimised SPS parameters and addition of novel nano-oxide formers

Development of an Oxide Dispersion Strengthened Austenitic Steel Powder with 4% Aluminum Addition

Manufacturing ODS Steels from GARS Powders by Friction Consolidation and Extrusion

Analysis of Strengthening Mechanisms in Nano-ODS Steel Depending on Preparation Route

Evolution of Y2O3 precipitates in ODS-316 L steel during reactive-inspired ball-milling and spark plasma sintering processes

Achieving excellent mechanical properties of ODS steel by Y2O3 addition

Achieving high strength and ductility in ODS-W alloy by employing oxide@W core-shell nanopowder as precursor

Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting

Effects of Fabrication Processing on the Microstructure and Mechanical Properties of Oxide Dispersion Strengthening Steels

Processing Heterogeneously Structured Oxide-Dispersion-strengthened Fe-10Cr-6.1Al-0.3Zr-0.1Y Alloy for Simultaneously Enhanced Strength and Ductility

Development of an oxide-dispersion-strengthened steel by introducing oxygen carrier compound into the melt aided by a general thermodynamic model

Preparation Of Nano-Structured 9cr-Ods Steel By Spark Plasma Sintering And Its Microstructure Characterization

A Simple Method to Produce Austenite-Based Low-Density Fe–20Mn–9Al–0.75C Steel by a Near-Rapid Solidification Process

Laser-based powder bed fusion of pre-alloyed oxide dispersion strengthened steel containing yttrium

Achieving ultrahigh strength in oxide-dispersion-strengthened CoCrNi alloy via in situ formation of coherent Y-Ti-O nanoprecipitates

Synchrotron Study on Load Partitioning Between Ferrite/martensite and Nanoparticles of a 9cr ODS Steel

Nanosized Oxide Phases in Oxide-Dispersion-strengthened Steel PM2000