Abstract:Oxide dispersion strengthened (ODS) steels are promising materials for high temperature applications, in particular in fission and fusion nuclear reactors. In comparison to common reduced activation ferritic/martensitic steels they exhibit better resistance to neutron irradiation and creep owing to an uniform dispersion of nano-oxides particles (~5 nm) and a very fine grain structure (~500 nm). ODS steels are commonly prepared by high-energy mechanical alloying (HEMA) of a mixture of steel powder and Y2O3 particles followed by a consolidation stage consisting of hot extrusion (HE) or hot isostatic pressing (HIP). The samples are then submitted to annealing around 1100°C for 1-2 hours. Recently, the present authors proposed a novel method based on low-energy mechanical alloying (LEMA). In general ODS microstructure is quite complex and several mechanisms contribute to the mechanical strengthening with different effects depending on the temperature. The present work analyses the role played by each single mechanism at increasing temperature by considering the specific microstructural features. ODS steels prepared through different routes and process parameters display different grain size distribution and homogeneity of particles dispersion, factors which strongly affect the mechanical properties. Yield stress values measured in tensile tests performed at increasing temperature up to 700°C, either taken from literature or achieved by authors, have been examined and the following strengthening mechanisms have been considered to fit the experimental data: (i) solid solution; (ii) Bailey-Hirsch; (iii) Hall-Petch; (iv) Orowan; (v) Coble creep and (vi) Arzt-Rősler-Wilkinson. The analyses evidence advantages and drawbacks of different preparation routes and suggest some criteria for further improving the mechanical properties of these materials.

Nanosized Oxide Phases in Oxide-Dispersion-strengthened Steel PM2000

Mechanical Properties and Microstructure of 9Cr-Ods-clf-1 Steel

Oxidation Mechanism of Three Fe-Al Alloys with and Without Addition of 0.1 At% Yttrium at 800 °C

Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting

Development of an Oxide Dispersion Strengthened Austenitic Steel Powder with 4% Aluminum Addition

Achieving excellent mechanical properties of ODS steel by Y2O3 addition

Laser-based powder bed fusion of pre-alloyed oxide dispersion strengthened steel containing yttrium

Analysis of Strengthening Mechanisms in Nano-ODS Steel Depending on Preparation Route

Phase Transformations in Yttrium –aluminium Oxides in Friction Stir Welded and Recrystallised PM2000 Alloys

Molecular Dynamics Simulation Study on the Possible Factors Affecting Stability of ODS Steel

Achieving ultrahigh strength in oxide-dispersion-strengthened CoCrNi alloy via in situ formation of coherent Y-Ti-O nanoprecipitates

Microstructure Evolution and Mechanical Properties of a High Cr Oxide Dispersion-Strengthened Steel through STARS Route Followed by Hot Isostatic Pressing

In-Situ Synchrotron Investigation of the Elastic and Tensile Properties of Oxide Dispersion Strengthened EUROFER97 Steel

Secondary phases characterization by SANS and XAS of an ODS ferritic steel after thermal aging at 873 K

Effects of Fe self-ion irradiation on a low carbon MX-ODS steel at 550C

Effects of Fe self-ion irradiation on a low carbon MX-ODS steel at 550 degrees C

Cost-Effective Thermomechanical Processing of Nanostructured Ferritic Alloys: Microstructure and Mechanical Properties Investigation

Comparative First-Principles Study of the Y2Ti2O7/Matrix Interface in ODS Alloys

Formation and Microstructural Evolution of Ferritic ODS Steel Powders during Mechanical Alloying

Development of an oxide-dispersion-strengthened steel by introducing oxygen carrier compound into the melt aided by a general thermodynamic model

Microstructure and properties of oxide-reinforced FeCrAl matrix alloy manufactured by selective laser melting