Abstract:In this study, silicon nitride (SiNx) thin films were deposited on polyimide (PI) substrates as barrier layers by a plasma enhanced chemical vapor deposition (PECVD) system. The gallium-doped zinc oxide (GZO) thin films were deposited on PI and SiNx/PI substrates at room temperature (RT), 100 and 200 °C by radio frequency (RF) magnetron sputtering. The thicknesses of the GZO and SiNx thin films were controlled at around 160 ± 12 nm and 150 ± 10 nm, respectively. The optimal deposition parameters for the SiNx thin films were a working pressure of 800 × 10-3 Torr, a deposition power of 20 W, a deposition temperature of 200 °C, and gas flowing rates of SiH₄ = 20 sccm and NH₃ = 210 sccm, respectively. For the GZO/PI and GZO-SiNx/PI structures we had found that the GZO thin films deposited at 100 and 200 °C had higher crystallinity, higher electron mobility, larger carrier concentration, smaller resistivity, and higher optical transmittance ratio. For that, the GZO thin films deposited at 100 and 200 °C on PI and SiNx/PI substrates with thickness of ~1000 nm were used to fabricate p-i-n hydrogenated amorphous silicon (α-Si) thin film solar cells. 0.5% HCl solution was used to etch the surfaces of the GZO/PI and GZO-SiNx/PI substrates. Finally, PECVD system was used to deposit α-Si thin film onto the etched surfaces of the GZO/PI and GZO-SiNx/PI substrates to fabricate α-Si thin film solar cells, and the solar cells' properties were also investigated. We had found that substrates to get the optimally solar cells' efficiency were 200 °C-deposited GZO-SiNx/PI.

Advanced Deposition Phase Diagrams for Guiding Si:H-Based Multijunction Solar Cells

Fabrication and Optimization of Single-Junction Nc-Si:H N–i–p Solar Cells Using Si:H Phase Diagram Concepts Developed by Real Time Spectroscopic Ellipsometry

Using phosphorus doped hydrogenated silicon oxycarbide film as a window layer on the light entrance side of silicon heterojunction solar cells: The role of phase separation on electron transport

Designing Efficient Solar-Driven Hydrogen Evolution Photocathodes Using Semitransparent Moq(X)Cl(Y) (Q = S, Se) Catalysts on Si Micropyramids

Thin heterojunction a-Si:H photovoltaic cell design with no doped a-Si:H layers

Light management in hydrogenated amorphous silicon germanium solar cells

High Efficiency Amorphous Silicon Germanium Solar Cells

Key Issues for High-Efficiency Silicon Thin Film Solar Cells Prepared by RF-PECVD under High-Pressure-depletion Conditions

Improved Interface Microstructure Between Crystalline Silicon and Nanocrystalline Silicon Oxide Window Layer of Silicon Heterojunction Solar Cells

Study on P-a-Si:H properties of N-type heterogeneous junction solar cells manufactured by large-area parallel plate PECVD machine

Deposition and Characterization of High-Efficiency Silicon Thin-Film Solar Cells by HF-PECVD and OES Technology

Development of Highly Stable Hydrogenated Amorphous Silicon Films for Application in Solar Cells

Advanced PECVD Processes for SiNW Based Solar Cells and Thin Film Transistors

Role of SiN x Barrier Layer on the Performances of Polyimide Ga₂O₃-doped ZnO p-i-n Hydrogenated Amorphous Silicon Thin Film Solar Cells

Optimized N-Type Amorphous Silicon Window Layers Via Hydrogen Dilution For Silicon Heterojunction Solar Cells By Catalytic Chemical Vapor Deposition

PHOTOELECTRIC STRUCTURE DESIGN OF HIGH EFFICIENCY AMORPHOUS SILICON GERMANIUM SOLAR CELL BASED ON LIGHT MANAGEMENT AND BAND GAP PROFILING

Simulation of the Efficiency of a-SiC:H/a-Si:H Tandem Multilayer Solar Cells

Optimum Design And Preparation Of A-Si/A-Si/A-Sige Triple-Junction Solar-Cells

Optimum design and preparation of<i>a</i>‐Si/<i>a</i>‐Si/<i>a</i>‐SiGe triple‐junction solar cells

The microstructure of underdense hydrogenated amorphous silicon and its application to silicon heterojunction solar cells

Development of high conducting phosphorous doped nanocrystalline thin silicon films for silicon heterojunction solar cells application