Abstract:High dielectric constant multilayer coatings are commonly used on high-reflection mirrors for high-peak-power laser systems because of their high laser-damage resistance. However, surface contaminants often lead to damage upon laser exposure, thus limiting the mirror's lifetime and performance. One plausible approach to improve the overall mirror resistance against laser damage, including that induced by laser-contaminant coupling, is to coat the multilayers with a thin protective capping (absentee) layer on top of the multilayer coatings. An understanding of the underlying mechanism by which laser-particle interaction leads to capping layer damage is important for the rational design and selection of capping materials of high-reflection multilayer coatings. In this paper, we examine the responses of two candidate capping layer materials, made of SiO2 and Al2O3, over silica-hafnia multilayer coatings. These are exposed to a single oblique shot of a 1053 nm laser beam (fluence ∼10 J/cm2, pulse length 14 ns), in the presence of Ti particles on the surface. We find that the two capping layers show markedly different responses to the laser-particle interaction. The Al2O3 cap layer exhibits severe damage, with the capping layer becoming completely delaminated at the particle locations. The SiO2 capping layer, on the other hand, is only mildly modified by a shallow depression. Combining the observations with optical modeling and thermal/mechanical calculations, we argue that a high-temperature thermal field from plasma generated by the laser-particle interaction above a critical fluence is responsible for the surface modification of each capping layer. The great difference in damage behavior is mainly attributed to the large disparity in the thermal expansion coefficient of the two capping materials, with that of Al2O3 layer being about 15 times greater than that of SiO2.

Fatigue Effect of Hafnia/silica High-Reflective Coatings under Multiple Laser Pulses at 1064 Nm

Analysis of Laser Intensification by Nodular Defects in Mid-Infrared High Reflectance Coatings

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

Defect Analysis of UV High-Reflective Coatings Used in the High Power Laser System

Investigating the material properties of HfO2/SiO2-based anti-reflection coatings during 1064 nm laser-induced breakdown in air and vacuum conditions

Enhancement of the Load Capacity of High-Energy Laser Monocrystalline Silicon Reflector Based on the Selection of Surface Lattice Defects

Toward improving the reflectivity of ablative heat-insulating coating under high-energy laser irradiation

Effect of the Dynamic Porous Structure Generation in Laser Irradiated Multi-Functional Coatings

Study on UV-laser fatigue damage of sol-gel antireflective coating using XPS and slow positron beam Doppler broadening spectrum

Effect of Polishing-Induced Subsurface Impurity Defects on Laser Damage Resistance of Fused Silica Optics and Their Removal with Hf Acid Etching

Interface and Defects Engineering for Multilayer Laser Coatings

The Electric Field Modulation by Lateral Crack Coated with Hfo2/Sio2 High Reflector

Temporal Scaling Law and Intrinsic Characteristic of Laser Induced Damage on the Dielectric Coating

Experimental investigation and numerical simulation of defect elimination by CO2 laser raster scanning on fused silica

Study of micron-scale defects in optical coatings for high-power lasers deposited by ion beam sputtering

A study on the thermal cyclic behavior of NiCrAlY coatings via femtosecond laser remelting with high repetition rate

Effects of Post-Processing and Loading Orientation on High-Cycle Fatigue of Selective Laser Melted Ti-6Al-4V

Effects of reflectivity on laser-ablation resistance of the laser-cladding repaired Nd2O3 modified SiO2 coatings on C/C composites

Effects of CO2 Laser Irradiation on Surface Morphology and Stress Distribution of Fused Silica

Laser Resistance Dependence of Interface for High-Reflective Coatings Studied by Capacitance-Voltage and Absorption Measurement

Impact of laser-contaminant interaction on the performance of the protective capping layer of 1 ω high-reflection mirror coatings