Abstract:In present work, diamond/β-SiC composite interlayers were deposited on cemented tungsten carbide (WC-6%Co) substrates by microwave plasma enhanced chemical vapor deposition (MPCVD) using H2, CH4 and tetramethylsilane (TMS) gas mixtures. The microstructure, chemical bonding, element distribution and crystalline quality of the composite interlayers were systematically characterized by means of field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), X-ray photoelectron spectrometer (XPS), electron probe microanalysis (EPMA), Raman spectroscopy and transmission electron microscropy (TEM). The influences of varying TMS flow rates on the diamond/β-SiC composite interlayers were investigated. Through changing the TMS flow rates in the reaction gas, the volume fraction of β-SiC in the composite interlayers were tunable in the range of 12.0%–68.1%. XPS and EPMA analysis reveal that the composite interlayers are composed of C, Si element with little cobalt distribution. The better crystallinity of the diamond in the composite is characterized based on the Raman spectroscopy, which are helpful to deposit top diamond coatings with high quality. Then, the adhesion of top diamond coatings were estimated using Rockwell C indentation analysis, revealing that the adhesion of top diamond coatings on the WC-6%Co substrates can be improved by the interlayers with the diamond/β-SiC composite structures. Comprehensive TEM interfacial analysis exhibits that the cobalt diffusion is weak from WC-6%Co substrate to the composite interlayer. The homogeneous microcrystalline diamond coatings with the most excellent adhesion can be fabricated on the substrates with the composite interlayer with the β-SiC/diamond ratio of about 45%. The composite structures are appropriate for the application in high-efficiency mechanical tool as a buffer layer for the deposition of the diamond coating.

Mechanical Properties and Interface Microstructure of Fe-Ni-Wc-Based Impregnated Diamond Composite Reinforced by Mo2c Layer

Mo 2 C interface layer: effect on the interface strength and cutting performance of diamond/Fe-Ni-WC composites

Mo2C Interface Layer: Effect on the Interface Strength and Cutting Performance of Diamond/fe-Ni-wc Composites

Wear performance of the Fe-Ni-WC-based impregnated diamond bit with Mo2C-coated diamonds: Effect of the interface layer

Influence of B4C Coating on Graphitization for Diamond/wc-Fe-ni Composite

Effect of WC Nanoparticles on the Microstructure and Properties of WC-Bronze-Ni-Mn Based Diamond Composites

Interface microstructure and abrasive wear properties of WC-iron matrix composites with Ni, Mo, Fe added to the preforms

Diamond/ Β -Sic Film As Adhesion-Enhanced Interlayer for Top Diamond Coatings on Cemented Tungsten Carbide Substrate

Effect of Mo on Interdifussion Behaviors and Interfacial Characteristics in Multicomponent Diffusion Couple of FeCoCrNi High Entropy Alloys and Diamond

Bending Strength and Cutting Performance of WB-Coated-Diamond/Fe-Ni Composites

High-strength and wear-resistant Co-Cr-Mo/diamond composites fabricated by selective laser melting

Mo2C Coating on Diamond: Different Effects on Thermal Conductivity of Diamond/al and Diamond/cu Composites

Sintering and Toughening Behavior of Dense SiC-coated Diamond Dispersed WC/Co Composites(Materials, Metallurgy & Weldability)

Microstructure and Properties of Diamond/ni-Based Alloy Composite Coatings by Induction Brazing

Effect of Nano-Additives on Microstructure and Mechanical Properties of Ti(C,N)-Tib2-Wc Composite Ceramic Cutting Tool Materials

Effect of Nano-Vanadium Nitride on Microstructure and Properties of Sintered Fe-Cu-based Diamond Composites

Mechanical properties and tribological behavior of Fe/nano-diamond composite prepared by hot-press sintering

Study of micro-nanocrystalline composite diamond coatings on cemented carbide cutting tools - acid + plasmas etching method

Effects of Sintering Parameters and WC Addition on Properties of Iron-Nickel Pre-Alloy Matrix Diamond Composites

Improvement in the universality of high-performance CVD diamond coatings on different WC-Co substrates by introducing multilayered diamond/β-SiC composite

Microstructure and Thermal Behavior of Diamond/cu Composites: Effects of Surface Modification