Abstract:Diamond/aluminum composites, as a new generation of thermal management materials, are caught in the dilemma between inhibiting the formation of Al 4 C 3 and improving the performance. Herein, we proposed a strategy for nanoscale multi-interface phase structure engineering, utilizing a combination of magnetron sputtering and vacuum heat treatment to obtain diamond particles with nanoscale TiC-Ti layers. Prolonging the vacuum heating time increases the content of TiC, but results in significant differences in the morphology and coverage of TiC formed on the diamond(100) and (111) facets. First-principles calculations reveal that the work of adhesion and C-Ti reaction tendency of diamond(100)/Ti are stronger than those of diamond(111)/Ti, clarifying the difference in interfacial properties between diamond/Ti and diamond/TiC. Diamond-TiC-Ti configuration obtained in advance contributes to fabricating the composite with diamond-TiC-Al(Al 3 Ti) structure, and the multi-interface phase structure is beneficial to improve the interface bonding, adjust the acoustic mismatch, and inhibit the formation of Al 4 C 3 . (800 °C 0.5h)@Ti-diamond(100 μm)/aluminum composite with the multi-interface phase exhibits excellent thermal conductivity(646 W·m -1 ·K -1 ) and outstanding bending strength(358 MPa), exceeding 90% of the theoretical prediction of the differential effective medium model. The performance of (800 °C 0.5 h)@Ti-coated diamond/aluminum composite is about 30% higher than that of traditional Ti-coated diamond/aluminum composite. The TiC layer formed by increasing the heat treatment time is thicker and discontinuous, leading to a decrease in the thermal conductivity of the composite and a weakening effect of Al 4 C 3 inhibition. We clarified the formation mechanism of interface structure related to diamond orientation by multi-scale characterization. Based on the thermal conductivity prediction models, the interface structures corresponding to different diamond orientations were considered, and the predicted values showed good consistency with the experimental results. By interface modification engineering, we overcome the dilemma of introducing modified layer to inhibit Al-C reaction while leading to additional interface thermal resistance, providing insights into the interfacial thermal transport mechanism.

Mo 2 C interface layer: effect on the interface strength and cutting performance of diamond/Fe-Ni-WC composites

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Unveiling the formation of Mo2C coating on diamond particles along with anisotropic etching by Mo powder

Improvement in the universality of high-performance CVD diamond coatings on different WC-Co substrates by introducing multilayered diamond/β-SiC composite

Effect of the interfacial microstructure on hardness of multi-layer diamond coatings

Growth mechanism of Mo 2 C coatings on diamond particles in molten salt

Interface microstructure and abrasive wear properties of WC-iron matrix composites with Ni, Mo, Fe added to the preforms

Preparation of high thermal conductivity copper–diamond composites using molybdenum carbide-coated diamond particles

SiC Interlayer/diamond Coatings Prepared on Cemented Carbide Micro-Tools by High Current DC Extended Arc Chemical Vapor Deposition

Microstructure evolution of diamond with molybdenum coating and thermal conductivity of diamond/copper composites fabricated by spark plasma sintering

Effects of different element coatings on the interface characteristics and thermal conductivity of vacuum-sintered diamond/Cu composites

Effects of TiMoTa nano-crystalline interlayer on nucleation, adhesion and tribological behaviors of diamond coating

High-strength and wear-resistant Co-Cr-Mo/diamond composites fabricated by selective laser melting

Achieving high thermal conductivity and strong bending strength diamond/aluminum composite via nanoscale multi-interface phase structure engineering

Effect of Mo addition on microstructure and wear resistance of laser clad AlCoCrFeNi-TiC composite coatings

Interface characterization and mechanical properties of Mo-added chromium carbide-nickel composite

Effects of the In Situ Growth of CNTs on Ti-Coated Diamond Surfaces on the Mechanical Properties of Diamond/Aluminum Composites

Cutting performance and wear mechanism of multilayer diamond coated tools

Synthesizing SiC layer on diamond by heat treatment and its effects on density and thermal conductivity of diamond/W composite

The Microstructure and Wear Properties of Diamond Composite Coatings on TC4 Made by Induction Brazing

Interface characteristics of CVD diamond coating on WC-Co cemented carbide substrate