Comparative study on the properties and microscopic mechanism of Ti coating and W coating diamond-copper composites

Shuhui Huang,Hong Guo,Zhen Zhang,Ximin Zhang,Haofeng Xie,Zhongnan Xie,Lijun Peng,Xujun Mi

DOI: https://doi.org/10.1088/2053-1591/aba55d

IF: 2.025

2020-07-01

Materials Research Express

Abstract:Abstract Interface plays a decisive role in metal matrix composites, and the effects of Ti coating and W coating on the properties and microscopic mechanism of diamond-copper composites are compared in this paper. Ti-coated diamond with 50 nm, 100 nm and 150 nm plating thickness and W-coated diamond with 50 nm plating thickness are prepared by using magnetron sputtering. Then infiltration method is carried out to prepare diamond copper composites. SEM, EDS and XRD are used to material microstructure. Three-point bending experiment and flash method are used to test the bending strength and thermal conductivity of the composite material. The study found that, as the thickness of the Ti coating increases, the bending strength of the composites gradually increases, but the thermal conductivity first increases and then decreases. The thermal conductivity of W coated diamond copper composites is higher than that of Ti coated diamond copper composites with the same coating thickness. But bonding strength shows the opposite law. The reason for the above phenomenon is that the mechanism of action between the Ti coating and the W coating and the copper substrate is different at the micro interface of the composites. The research work has important reference value for the interface modification of diamond copper composites.

materials science, multidisciplinary