Abstract:Combustors with fuel-spray atomizers are particularly susceptible to a low-frequency oscillation at idle and subidle conditions. For aeroengine combustors, the frequency of this oscillation is typically in the range 50–120 Hz and is commonly called “rumble.” The mechanism involves interaction between the plenum around the burner and the combustion chamber. Pressure variations in the plenum or the combustor alter the inlet air and fuel spray characteristics, thereby changing the rate of combustion. This in turn leads to local “hot spots” which generate pressure oscillations as they convect through the downstream nozzle. In order to eliminate the combustion oscillations, it is essential to determine which fuel atomizers are particularly likely to lead to instability by quantifying their sensitivity to flow perturbations. This can be done by identifying the system through understanding the transfer function, which represents the relationship between the unsteadiness of combustion and the inlet fuel and air. In the present work, various types of signals are applied to produce a small change in the inlet fuel and air flow rates, the response in the rate of heat release caused downstream was calculated and stored for subsequent analysis. Afterwards, the system transfer function is calculated by determining the coefficients of an IIR filter (Infinite Impulse Response) for which the output signal is the downstream heat release rate and the input signal is the inlet flow rate. The required transfer function then follows from the Fourier transform of this relationship. The resulting transfer functions are compared with those obtained by the forced harmonic oscillations at a fixed given frequency. Suitably chosen input signals accurately recover the results for harmonic forcing at a single frequency, but also give detailed information about the combustor response over a wide frequency range. There are two distinct forms to the low-frequency quasisteady response. In the primary zone, the rate of combustion is influenced by the turbulence and is enhanced when the inlet air velocity is large. Near the edge of combustion zone, the rate of combustion depends on the mixture fraction and is high when the mixture fraction is close to the stoichiometric value. This generates ‘hot spots’ which convect into the dilution zone. At higher frequencies, the combustion lags this quasi-steady response through simple lag-laws and the relevant time delays have been identified.

Prediction of Combustion Noise for a Swirling Flame with Low Order Network Model

Combustion Instability Detection Based on Multi-Signal Information Fusion for an Industrial Gas Turbine Combustor

Combustion Rumble Prediction with Integrated Computational-Fluid-Dynamics/Low-Order-Model Methods

Detection of Precursors of Thermoacoustic Instability in a Swirled Combustor Using Chaotic Analysis and Deep Learning Models

An Improved NO Prediction Model for Large Eddy Simulation of Turbulent Combustion

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

Transfer Function Calculations for Aeroengine Combustion Oscillations

Compositional inhomogeneities as a source of indirect combustion noise

Prediction Method of Swirling Flame Lean Blowout Based on Flame Image Morphological Features

Low-Order Modelling of the Response of Ducted Flames in Annular Geometries

Thermoacoustic instability analysis of a laminar lean premixed flame under autoignitive conditions

A 2D Low-Order Thermoacoustic Network Model of Annular Combustor with Baffles in the Plenum

Analysis of the Mixing and Emission Characteristics in a Model Combustor

Sound Generation in Multicomponent Nozzle Flows With Dissipation

Characterizing Nonlinear Interaction Between a Premixed Swirling Flame and Acoustics: Heat-driven Acoustic Mode Switching and Triggering

DNS analysis of turbulence modulation by lean premixed prevaporized spray flames in a model combustor

Analysis of Thermoacoustic Instabilities Using the Helmholtz Method in a Swirled Premixed Combustor

Research on Flow Field Prediction in a Multi-Swirl Combustor Using Artificial Neural Network

Numerical study of combustion noise of a lean-premixed green H2-ethylene fuel: A machine learning optimization

Experimental And Numerical Investigations Of Low-Swirl Multi-Nozzle Combustion In A Lean Premixed Combustor