Abstract:Many practical lean-premixed combustion systems involved in land-based power plants, gas turbines and boilers are susceptible to self-excited combustion instability, which is characterized by detrimental periodic pressure oscillations. Little attention has been paid on experimentally characterizing the chemical emissions and thermodynamic properties of a thermoacoustic swirl combustor. In this work, the effects of (1) fuel-air equivalence ratio Phi and fuel flow rate Q(CH4) on generating such combustion instability and its impact on chemical emissions and thermodynamic properties in a swirling combustor are experimentally studied. For this, a methane-fueled lab-scale swirl combustor is designed and tested. To monitor the thermodynamic properties of the combustor, an acoustic pressure sensor, an infrared thermal imaging camera, K-type thermal couples, and an infrared flue gas analyzer are applied. It is found that the fuel-air ratio plays an important role on generating combustion instability at different frequencies and amplitudes. This is confirmed by conducting autocorrelation and frequency spectrum analyses of the acoustic pressure time trace. Furthermore, the dominant mode swap (mode-switching) between a low frequency omega(1) and a high non-harmonic one is experimentally observed. Whether the mode switching from high (harmonic or non-harmonic) to low frequency or low to high frequency is found to depend strongly on Q(CH4). As the equivalence ratio is changed from lean to rich, i.e. 0.8 <= Phi <= 1.2, NOx emission is increased from 1 ppm to 37 ppm. However, CO emission is decreased by 2 order of magnitudes from 1000 ppm first and then increased. The minimum CO emission is approximately 3.0 ppm. In addition, O-2 concentration is decreased by more than 80% with increased Phi, depending on the methane flow rate. This means that the combustion efficiency characterized by the O-2 emission is decreased dramatically from 99.5% to 68% with Phi increased from 0.6 to 1.2. The present work sheds light on the characteristics of chemical emissions and thermodynamic properties, when a thermoacoustic swirl combustor is operated with methane-air equivalence ratio Phi varied from lean to rich condition and different Q(CH4). It opens up a practical means to design a stably operated but low-emission thermoacoustic swirl combustor.

Numerical study of combustion noise of a lean-premixed green H2-ethylene fuel: A machine learning optimization

Optical and Numerical Investigations of Flame Propagation in a Heavy Duty Spark Ignited Natural Gas Engine

Numerical Investigation of the Combustion and Thermoacoustic Characteristics in an Annular Combustor with Hydrogen

A direct numerical simulation study of turbulence intensity effects on NOx formation in freely propagating premixed flames

Compositional inhomogeneities as a source of indirect combustion noise

Numerical Study on Combustion Stability in a Lean Premixed Combustor

Large-eddy simulations of self-excited thermoacoustic instability in a premixed swirling combustor with an outlet nozzle

Experimental Study and Analysis of Thermo-Acoustic Instabilities in Natural Gas Premixed Flames

Thermoacoustic Instability Characteristics and Flame/Flow Dynamics in a Multinozzle Lean Premixed Gas Turbine Model Combustor Operated with High Carbon Number Hydrocarbon Fuels

Analysis of the Mixing and Emission Characteristics in a Model Combustor

Experimental Study on Effects of Ammonia Enrichment on the Thermoacoustic Instability of Lean Premixed Swirling Methane Flames

Thermoacoustic Instability Drivers and Mode Transitions in a Lean Premixed Methane-Air Combustor at Various Swirl Intensities

Experimental Investigation of Entropy Waves Generated from Acoustically Excited Premixed Swirling Flame

Study of Burner Geometry Effects on Non-Premixed Flame Response under Acoustic Excitation

Numerical and Experimental Assessment of a Novel Multinozzle Burner with CO2 Diluent to Improve the Emissions from a Swirling Flame in a Combustion Chamber

Entropy: an Inspiring Tool for Characterizing Turbulence–Combustion Interaction in Swirling Flames Via Direct Numerical Simulations of Non-Premixed and Premixed Flames

Thermoacoustic instability analysis of a laminar lean premixed flame under autoignitive conditions

Experimental Characterizing Combustion Emissions and Thermodynamic Properties of a Thermoacoustic Swirl Combustor

Prediction of Combustion Noise for a Swirling Flame with Low Order Network Model

Flame visualization and spectral analysis of combustion instability in a premixed methane/air-fueled micro-combustor

Numerical Analysis of High Frequency Transverse Instabilities in a Can-Type Combustor