Abstract:The adoption of lean premixed prevaporised combustion systems can reduce NOx emissions from gas turbines, but unfortunately also increases their susceptibility to thermoacoustic instabilities. Initially, acoustic waves can produce heat release fluctuations by a variety of mechanisms, often by perturbing the equivalence ratio. If correctly phased, heat release fluctuations can subsequently generate more acoustic waves, which at high amplitude can result in significant structural damage to the combustor. The prediction of this phenomenon is of great industrial interest. In previous work, we have coupled a physics based, kinematic model of the flame with a network model to provide the planar acoustic response necessary to close the feedback loop and predict the onset and amplitude of thermoacoustic instabilities in a lab-scale, axisymmetric single burner combustor. The advantage of a time domain approach is that the modal interaction, the influence of harmonics, and flame saturation can be investigated. This paper extends this approach to more realistic, annular geometries, where both planar and circumferential modes must be considered. In lean premixed prevaporised combustors, fluctuations in equivalence ratio have been shown to be a dominant cause of unsteady combustion. These can occur, for example, due to velocity perturbations in the premix ducts, which can lead to equivalence ratio fluctuations at the fuel injectors, which are subsequently convected downstream to the flame surfaces. Here, they can perturb the heat release by locally altering the flame speed, enthalpy of combustion, and, indirectly, the flame surface area. In many gas turbine designs, particularly aeroengines, the geometries are composed of a ring of premix ducts linking a plenum and an annular combustor. The most unstable modes are often circumferential modes. The network model is used to characterise the flow response of the geometry to heat fluctuations at an appropriate location, such as the fuel injectors. The heat release at each flame holder is determined in the time domain using the kinematic flame model derived, as a function of the flow perturbations in the premix duct. This approach is demonstrated for an annular ring of burners on a in a simple geometry. The approach is then extended to an industrial type gas turbine combustor, and used to predict the limit cycle amplitudes.

Numerical Analysis of High Frequency Transverse Instabilities in a Can-Type Combustor

Experimental Study on Self-Excited Thermoacoustic Instabilities and Intermittent Switching of Azimuthal and Longitudinal Modes in an Annular Combustor

Combustion Instability Detection Based on Multi-Signal Information Fusion for an Industrial Gas Turbine Combustor

Multi-bifurcation behaviors of stability regimes in a centrally staged swirl burner

Numerical Investigation of the Combustion and Thermoacoustic Characteristics in an Annular Combustor with Hydrogen

Numerical investigation of azimuthal thermoacoustic instability in a gas turbine model combustor

Large eddy simulation and low-order modelling of azimuthal thermoacoustic instability in a gas turbine model annular combustor

Numerical Investigation of the Local Thermo-Chemical State in a Thermo-Acoustically Unstable Dual Swirl Gas Turbine Model Combustor

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Investigation of injector-coupled combustion dynamics in a methane-oxygen combustor using large eddy simulation and dynamic mode decomposition

Analysis of Thermoacoustic Instabilities Using the Helmholtz Method in a Swirled Premixed Combustor

Computational investigations of the coupling between transient flame dynamics and thermo-acoustic instability in a self-excited resonance combustor

Thermoacoustic Instability Drivers and Mode Transitions in a Lean Premixed Methane-Air Combustor at Various Swirl Intensities

Thermo-acoustic Instabilities in the PRECCINSTA Combustor Investigated Using a Compressible LES-pdf Approach

Low-Order Modelling of the Response of Ducted Flames in Annular Geometries

Analytical Characterization of Low-Frequency Instabilities in a Simple Duct System

Large Eddy Simulation and Acoustic Analysis of Combustion Instability in an Annular Combustor with Low-Swirl Flames

Large Eddy Simulations of Turbulent Combustion of Kerosene-Air in a Dual Swirl Gas Turbine Model Combustor at High Pressures

Large Eddy Simulation of a Dual Swirl Gas Turbine Combustor: Flame/flow Structures and Stabilisation under Thermoacoustically Stable and Unstable Conditions

Thermoacoustic instability analysis of a laminar lean premixed flame under autoignitive conditions

Numerical Investigation of Supercritical Combustion Dynamics in a Multi-Element LOx-Methane Combustor Using Flamelet-Generated Manifold Approach