Abstract:Generalized hydrodynamic equations were originally proposed to describe the rarefied non-equilibrium flows beyond the Navier–Stokes–Fourier (NSF) equations by constructing a non-equilibrium canonical distribution function for the mesoscopic Boltzmann equation. Subsequently, nonlinear coupled constitutive relations (NCCR) were developed under the adiabatic assumption, the Eu’s closure, and Myong’s simplification. NCCR+ was also proposed to include the omitted terms in Myong’s simplification. The goal of this paper is to assess the improvements in the accuracy due to NCCR+ and the influence of the bulk viscosity in one-dimensional steady shock wave structure for monatomic and diatomic gases. In order to solve NCCR+ equations, a coupled solution process based on the time-independent method for non-conserved variables is employed, which is different from the previous uncoupled solution process used for the NCCR equations. Shock structures in argon and nitrogen are calculated up to Mach 50, where the shock profile, inverse shock thickness, asymmetry parameter, and temperature–density separation distance are validated by DSMC and available experimental measurements. The results show that NCCR+ could not provide much improvement in accuracy compared to NCCR but adds to the computational cost, suggesting that Myong’s simplification used in NCCR is satisfactory. Both NCCR and NCCR+ perform better than NSF in computing the one-dimensional shock wave structure at high Mach numbers. It is also shown that the bulk viscosity has significant influence on the accuracy of prediction of the shock wave structure in a diatomic gas using both NSF and NCCR. Stokes’ hypothesis in conventional NSF is valid only for flows in a monatomic gas and for very low Mach number flows in a diatomic gas. Additionally, it is also found that the viscosity exponent s = 0.81 in variable-hard-sphere model provides a good fit with the experimental data for shock wave in argon using NCCR.

Compositional noise in nozzles with dissipation

Compositional inhomogeneities as a source of indirect combustion noise

Sound Generation in Multicomponent Nozzle Flows With Dissipation

A physical model for indirect noise in non-isentropic nozzles: transfer functions and stability

Indirect noise from weakly reacting inhomogeneities

Multispecies Flow Indirect-Noise Modeling Re-Examined with a Helicopter-Engine Application

Numerical Analysis of the Micro-Couette Flow Using a Non-Newton–fourier Model with Enhanced Wall Boundary Conditions

Modified Nonlinear Coupled Constitutive Relations Model for Hypersonic Nonequilibrium Flows

Computation of Shock Wave Structure Using a Simpler Set of Generalized Hydrodynamic Equations Based on Nonlinear Coupled Constitutive Relations

An empirical model of noise sources in subsonic jets

Analysis of supersonic jet turbulence, fine-scale noise, and shock-associated noise from characteristic, bi-conic, faceted, and fluidic injection nozzles

Acoustic emission due to the interaction between shock and instability waves in 2D supersonic jet flows

Prediction of Combustion Noise for a Swirling Flame with Low Order Network Model

Effective Jet Properties for the Estimation of Turbulent Mixing Noise Reduction by Water Injection

Assessment of the Indirect Combustion Noise Generated in a Transonic High-Pressure Turbine Stage

Effective Jet Properties for the Prediction of Turbulent Mixing Noise Reduction by Water Injection

An extension of the compound flow theory with friction between the streams and at the wall

Nonlinear interaction model of subsonic jet noise

A solution for the quasi-one-dimensional linearised Euler equations with heat transfer

Receptivity of a supersonic jet due to acoustic excitations near the nozzle lip

Noise and Noise Reduction in Supersonic Jets