Abstract:In the framework of Reynolds-averaged Navier–Stokes simulation, supersonic turbulent combustion flows at the German Aerospace Centre (DLR) combustor and Japan Aerospace Exploration Agency (JAXA) integrated scramjet engine are numerically simulated using the flamelet model. Based on the DLR combustor case, theoretical analysis and numerical experiments conclude that: the finite rate model only implicitly considers the large-scale turbulent effect and, due to the lack of the small-scale non-equilibrium effect, it would overshoot the peak temperature compared to the flamelet model in general. Furthermore, high-Mach-number compressibility affects the flamelet model mainly through two ways: the spatial pressure variation and the static enthalpy variation due to the kinetic energy. In the flamelet library, the mass fractions of the intermediate species, e.g. OH, are more sensible to the above two effects than the main species such as H2O. Additionally, in the combustion flowfield where the pressure is larger than the value adopted in the generation of the flamelet library or the conversion from the static enthalpy to the kinetic energy occurs, the temperature obtained by the flamelet model without taking compressibility effects into account would be undershot, and vice versa. The static enthalpy variation effect has only little influence on the temperature simulation of the flamelet model, while the effect of the spatial pressure variation may cause relatively large errors. From the JAXA case, it is found that the flamelet model cannot in general be used for an integrated scramjet engine. The existence of the inlet together with the transverse injection scheme could cause large spatial variations of pressure, so the pressure value adopted for the generation of a flamelet library should be fine-tuned according to a pre-simulation of pure mixing.

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

Large Eddy Simulations of Turbulent Combustion of Kerosene-Air in a Dual Swirl Gas Turbine Model Combustor at High Pressures

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Large Eddy Simulation of Flame Structure and Combustion Mode in a Hydrogen Fueled Supersonic Combustor

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Validation and analyses of RANS CFD models for turbulent heat transfer of hydrocarbon fuels at supercritical pressures

Numerical Investigation on Flame-Stabilization Mechanism of Supersonic-Combustor-based High-Temperature CO/H2 Jet

Exploration of Flamelet Model Applications in a Kerosene Fueled Supersonic Combustor

Theoretical Analysis of Flamelet Model for Supersonic Turbulent Combustion

Numerical Investigation of Coaxial GCH4/LOx Combustion at Supercritical Pressures

Evaluation of Flamelet/progress Variable Model for the Applications in Supersonic Combustion Using Hybrid RANS/LES Approach

Correction of Low-Reynolds Number Turbulence Model to Hydrocarbon Fuel at Supercritical Pressure

An Improved Flamelet/progress Variable Modeling in a Hydrogen-Fueled Scramjet

A dynamic combustion model for supersonic turbulent combustion

Large-Eddy Simulation of Supercritical Combustion: Model Validation Against Gaseous H2–O2 Injector

Application and Theoretical Analysis of the Flamelet Model for Supersonic Turbulent Combustion Flows in the Scramjet Engine

A Pressure-Based Algorithm for Gaseous Hydrogen/Liquid Oxygen Jet Flame at Supercritical Pressure

Numerical investigation of high-pressure combustion in rocket engines using Flamelet/Progress-variable models

Research on the Application of Steady Laminar Flamelet Model Used in Two-phase Supersonic Combustion

Numerical Simulation of Methane-Hydrogen-air Premixed Combustion in Turbulence

Numerical Modeling and Suppression of Combustion Instabilities in a Partially Premixed Combustor