Abstract:The prediction of micro milling forces in difficult-to-machine materials such as titanium alloys, which have small dimensions and arc-thin-walled features, has become a major challenge due to coupling effects of multi-physics fields. This problem has become a key bottleneck in the development of aerospace, biomedical, and other fields. This study focuses on titanium alloy arc-thin-walled parts and develops a micro milling force prediction model that considers the dual flexible coupling deformation and geometric features of arc-thin-walled parts in the process of micro milling. Firstly, a micro milling force theoretical model is established based on the instantaneous cutter position angle and instantaneous uncut chip thickness. Secondly, the detailed geometric analysis is conducted to calculate the entry and exit angles and instantaneous uncut chip thickness considering the micro milling path characteristics. Subsequently, the Euler beam and Timoshenko beam are assumed based on the characteristics of the cutter and workpiece structure, as well as the force situations. The deflection deformation values are calculated by solving unit stiffness matrix. The coupling deflection deformation is introduced into the micro milling force prediction model by an iterative algorithm, and this improves the instantaneous uncut chip thickness model. Finally, the micro milling force data is obtained through arc micro milling experiments, and the coefficient of micro milling force is identified. The reliability and accuracy of the micro milling force prediction model are verified through experiments, of which the prediction error range is 9.005~12.427%. The proposed model and methodology have practical significance and provide a basis for optimizing micro milling processes and promoting the development of related fields.

Prediction of Cutting Forces in Flexible Micro Milling Processes by Considering the Change of Instantaneous Cutting Direction

Modeling and Analysis of Force Prediction in Milling Process of Unidirectional Fiber Reinforced Polymer Composites

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Generic Cutting Force Modeling Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Generic Cutting Force Modeling with Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

A Comprehensive Micro-Milling Force Model for a Low-Stiffness Machining System

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

A New Method for Cutting Force Prediction in Peripheral Milling of Complex Curved Surface

Generic Instantaneous Force Modeling and Comprehensive Real Engagement Identification in Micro-Milling

Micro milling force prediction of arc thin-walled parts considering dual flexibility coupling deformation

Predictive Model of Milling Force for Complex Profile Milling

Force prediction in ultrasonic vibration-assisted milling

Modeling of Three-Dimensional Cutting Forces in Micro-End-Milling

Reliability analysis of micro milling accuracy based on flexible force model

A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials

A New Procedure for the Prediction of the Cutting Forces in Peripheral Milling

Investigation on dynamic tool deflection and runout-dependent analysis of the micro-milling process

Influence of tool flank wear considering tool edge radius on instantaneous uncut chip thickness and cutting force in micro-end milling

Modeling of cutting force in micro-milling considering asymmetric tool wear

Prediction of Nonlinear Micro-Milling Force with a Novel Minimum Uncut Chip Thickness Model