Abstract:The development of light-emitting diode (LED) technology has resulted in widespread solid state lighting (SSL) use in consumer and industrial applications. Previous researchers have shown that LEDs from the same manufacturer and operating under same use-condition may have significantly different degradation behavior. Applications of LEDs to safety critical and harsh environment applications necessitate the characterization of failure mechanisms and modes. This paper focuses on a prognostic health management (PHM) method based on the measurement of forward voltage and forward current of bare LED under harsh environment. In this paper, experiments have been done on single LEDs subjected to combined temperature–humidity environment of 85 °C, 85% relative humidity. Pulse width modulation (PWM) control method has been employed to drive the bare LED in order to reduce the heat effect caused by forward current and high frequency (300 Hz). A data acquisition system has been used to measure the peak forward voltage and forward current. Test to failure (luminous flux drops to 70%) data has been measured to study the effects of high temperature and humid environment loadings on the bare LEDs. A solid state cooling method with a Peltier cooler has been used to control the temperature of the LED in the integrating sphere when taking the measurement of luminous flux. The shift of forward voltage forward current curve and lumen degradation has been recorded to help build the failure model and predict the remaining useful life (RUL). Particle filter has been employed to assess the RUL of the bare LED. Model predictions of RUL have been correlated with experimental data. Results show that prediction of RUL of LEDs, made by the particle filter model, works with acceptable error-bounds. The presented method can be employed to predict the failure of LED caused by thermal and humid stresses.

Experimental Research on Voltage Sag Tolerance of High-power LED Lamps

Research on Load Characteristics of Energy-saving Lamp and LED Lamp

Experimental Study on Voltage Sag Tolerance of LED Electronic Display

Experimental Research On Distribution Of Led'S Light Intensity

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

Thermal Analysis and Design of High-Power LED Street Light

Study on the Characteristics and Compensation of Lamp Voltage Drop

[Atherothrombosis in patients with type 2 diabetes mellitus: an overview of pathophysiology].

A Novel Zvs Double Switch Flyback Inverter and Pulse Controlled Dimming Methods for Flat Dbd Lamp

Thermal performance testing for high power light-emitting diode based on voltage-current characteristics with pulse injection

Research on the Effects of Voltage Sags and Harmonics on the Output Characteristics of Switching Power Supply

Benchmarking of Voltage Sag Generators

Industrial Feasibility of Medium-voltage High-power Comprehensive Treatment Device for Voltage Sags

Upgrade Study Of High Power Electronics Laboratory For +/- 800kv Uhvdc Valves

Analysis of the Degradation of High Power Light Emitting Diode

Degradation Behaviors of High Power Gan-Based Blue Light Emitting Diodes

Deficiency and Improvement Means of Testing Methods of LED Lighting Products

The Experimental Research of Light Efficien for Lamps

The Comparison of Light Efficacy between LED and Traditional Light Sources

Electrical and Optical Characteristics of Electrodeless Lamp

Assessment of Lumen Degradation and Remaining Life of Light-Emitting Diodes Using Physics-Based Indicators and Particle Filter