Abstract:A precise measurement of optical power, forward voltage, and junction temperature of light-emitting diodes (LEDs) is the key for characterization and health monitoring of these devices. In many cases, LED characterization is carried out with relatively long (10 ms and longer) pulses, that is, in conditions in which self-heating can significantly impact measurement results. To overcome this limitation, this article proposes a fast and versatile measurement approach based on a specifically designed current source, with a maximum current of about 1 A, high stability (variations under 0.1%) and settling time s, and demonstrates its applicability to pulsed and transient characterization of power LEDs. The proposed system has the inherent advantages of 1) permitting a fast pulsed characterization of the devices, which—as we demonstrate—is much more accurate than quasipulsed or dc analysis; 2) allowing isothermal characterization of LEDs without requiring long settling times, with beneficial impact on the throughput of LED characterization; 3) allowing characterization of the voltage heating transient (during constant current operation), which is the key for junction temperature and thermal resistance extraction, as well as for the development of compact models; 4) monitoring the optical power during the self-heating transient; and 5) the spectrum of the device providing additional information, such as the peak-shift or the phosphor behavior. The efficacy of the proposed approach has been demonstrated by testing commercial LEDs: the results clearly indicate that a fast ( s) LED characterization is necessary for a proper extraction of the main spectral parameters and of the related temperature dependence.

Thermal performance testing for high power light-emitting diode based on voltage-current characteristics with pulse injection

Thermal Analysis and Design of High-Power LED Street Light

Experimental Study and Taguchi Analysis on LED Cooling by Thermoelectric Cooler Integrated with Microchannel Heat Sink

Measurement of the thermo-optic parameters of power LED on pulse current

Thermal Properties of Microscale Inorganic Light-Emitting Diodes in a Pulsed Operation

Rapid thermal cycling by eddy current inducted heating on optical property and thermostability of high power LED

High Power LED Thermal Performance Test Analysis and Its Research Methods

Performances and microstructures of a high-power LED based on rapid thermal cycling

The Measurement of LED Junction Temperature and Thermal Capacity Using Pulse Current

Investigation of microstructure and optical property of high power LED based on rapid thermal cycling

Influence of Properties and Microstructures on Thermal Fatigue Testing of High-Power LED

Thermal Management of High-Power LEDs Based on Integrated Heat Sink with Vapor Chamber

A Comparative Study of Properties and Microstructures on Thermal Fatigue Testing of A High-Power Led

Effect of Eddy Current Inducted Heating on Optical Property and Thermostability of High Power LED

Thermal Model Design and Analysis of High-Power LED Headlamp Cooling Device Based on the Thermoelectric Effect

Achieving Accurate Electro-Optical-thermal Measurements of High-Power LEDs

Junction Temperature Measurement and Luminous Properties Research of High-Power LED

Influence Of Rapid Thermal Cycling On Optical Property And Microstructure Of High Power Led

Fast Characterization of Power LEDs: Circuit Design and Experimental Results

3D Thermal Analysis of Rectangular Microscale Inorganic Light-Emitting Diodes in a Pulsed Operation

Thermal Resistance Evaluation of High Power LED