Abstract:Series connection is an attractive approach to increase the blocking voltage of SiC power MOSFETs. Currently, the voltage balancing design of the series connection of the SiC MOSFETs highly relies on offline calibration and is challenging in the complex field operation. In this paper, a quantitative model to assess the voltage balancing performance is proposed to achieve a clear mathematical interpretation of the dynamic response of the voltage imbalance control loop. To begin with, an analytical model of the drain-source voltage rising time during the turn-off transient concerning the non-constant Miller plateau is proposed. Based on the turn-off model of the single device, the voltage imbalance sensitivity (VIS) is proposed to describe the influence of the parameters on the gate driving signals on the voltage imbalance. The VIS parameter can be easily achieved from the behavior of single devices, abandoning the complex variables in series connection. Further, for the typical case, active time delay voltage balancing methods are selected to demonstrate the application of the VIS analysis method. Based on VIS, the accurate close-loop design is proposed for controlling the delayed time among the devices. The proposed analysis and method are verified in simulation and experiment. The paper offers a generalized approach to assess the performance and the design of the series connection of the SiC MOSFETs, which can be further applied in many other methods for parameter design and engineering applications.

Voltage-Balanced Behavioral Model Considering Carrier Extraction Effect for Series-Connected Trench Gate FS-IGBTs

An IGBT Behavior Model Suitable for Series Applications

Dynamic Electrothermal Model of Paralleled IGBT Modules With Unbalanced Stray Parameters

An On-State Analytical Model for the Trench Insulated Gate Bipolar Transistor (TIGBT)

Analytical Model and Design of Voltage Balancing Parameters of Series-Connected SiC MOSFETs Considering Non-Flat Miller Plateau of Gate Voltage

Operating Principles of Series-Connected IGBTs Based on Active Clamping Circuit in Voltage Source Converters

Behavior model for series connected high voltage IGBTs

Modeling and Analysis of IGBT Based on Two-Dimensional Charge Distribution

A Hybrid Active Gate Drive for Switching Loss Reduction and Voltage Balancing of Series-Connected IGBTs

Physical Model Analysis During Transient for Series-Connected HVIGBTs

An Improved Fourier-Series-Based IGBT Model by Mitigating the Effect of Gibbs Phenomenon at Turn on

Active Gate Charge Control Strategy for Series-Connected Igbts

Voltage Balancing Optimization of Series-Connected Igbts in Solid-State Breaker by Using Driving Signal Adjustment Technique

The voltage sharing of commercial IGBTS in series with passive components

A Coupled Circuit-Ambipolar Diffusion Equation Model and Its Solution Methodology for Insulated Gate Bipolar Transistors

Modeling for General Snubber Circuits and the Reason for Voltage Unbalance between the Inner and Outer Devices in Three Level IGBT Converters

A Coupled 3D Finite Element-Circuit Model for the Numerical Analysis of Small Time Scale Transients of an Insulated Gate Bipolar Transistor Power Electronics Device

A Numerical Method for Solving the Physics-Based Model of IGBT with All Free-Carrier Injection Conditions in the Base Region

Modeling and Stability Analysis for a Closed Loop Active IGBT Gate Drive

A 2-D Nonlinear Ambipolar Diffusion Equation Model of an IGBT and Its Numerical Solution Methodology

A Compact Gate Control and Voltage-Balancing Circuit for Series-Connected SiC MOSFETs and Its Application in a DC Breaker