Abstract:This letter extends a new isolated bidirectional three‐phase buck‐boost power‐factor‐correction rectifier concept to medium‐voltage input, resulting in an solid‐state transformer (SST) that performs MVac‐LVdc conversion in a single converter stage and, unlike many modular SST concepts, employs only a single medium‐frequency transformer. The SST's primary side operates modular‐multilevel‐converter bridge legs in the quasi‐two‐level mode to minimize the cell capacitors, while the secondary side employs a standard LV three‐phase rectifier, and a dual‐active‐bridge‐like modulation strategy allows power flow regulation and ensures sinusoidal grid currents. High‐power applications with low‐voltage (LV) dc loads, for example, fast charging stations for electric vehicles (EVs), are typically supplied from the medium‐voltage (MV) grid. Aiming for low volume, MVac‐LVdc solid‐state transformers (SSTs) that provide galvanic separation with medium‐frequency transformers (MFTs) are thus considered, which are conventionally realized as two‐stage systems that consist of an ac‐dc power‐factor‐correction (PFC) rectifier and an isolated dc‐dc converter. This letter extends a new single‐stage isolated bidirectional PFC rectifier concept to MV levels, resulting in an SST that performs MVac‐LVdc conversion in a single converter stage and, unlike many modular SST concepts, employs only a single MFT. The SST's primary side operates modular‐multilevel‐converter (MMC) bridge legs, whose input voltages contain large ac components, in the quasi‐two‐level mode to minimize the cell capacitors. The secondary side employs a standard LV three‐phase rectifier, and a dual‐active‐bridge‐(DAB)‐like modulation strategy allows power flow regulation and ensures sinusoidal grid currents. The concept is explained and validated using detailed circuit simulations of an exemplary 1‐MW system operating between a 10‐kV three‐phase grid and an 800‐V dc output. The component stresses are evaluated, and an efficiency of 98.1% and a power density of up to 0.6 kW/dm3 are estimated.

ANovel Single Stage AC-AC Converter for Hybrid Solid State Transformer (HSST)

A Soft-Switching Solid-State Transformer Module

A Five-level AC/DC Converter for MV Solid-State Transformer

A Soft Start Approach of Solid-State Transformer

A Soft-switching Universal-input Solid State Transformer

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

Design and experiment of a zero-voltage-switching module for bidirectional DC solid-state transformer

A Novel Dual-Llc Resonant Soft Switching Converter For Super High Frequency Induction Heating Power Supplies

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

A Practical Solution of High-Frequency-Link Bidirectional Solid-State Transformer Based on Advanced Components in Hybrid Microgrid.

Multifunctional Control Strategy for a Hybrid Solid-State Transformer Applied to Modern Distribution Electric Grids

New single‐stage bidirectional three‐phase ac‐dc solid‐state transformer

A Novel Solid-State Transformer With Loosely Coupled Resonant Dual-Active-Bridge Converters

Back-to-Back H-Bridge Cell Based Modular Solid State Transformer with High-Frequency Link

Unified Equivalent Steady-State Circuit Model and Comprehensive Design of the LCC Resonant Converter for HV Generation Architectures

Neutral-Point Voltage Balancing Methods of Series-Half-Bridge LLC Converter for Solid State Transformer

MHz Level Two-Stage ZVS DC-DC Converter with Wide Input and Output Voltage Ranges

Partial Fluctuation Power Control of Resonant Converter in Solid-State Transformer

Innovative Matrix-Type AC-AC Solid-State Transformer Eliminating Ripple Power with Double-Grid Frequency

Solid-State Transformer Architecture Using AC–AC Dual-Active-Bridge Converter