Abstract:Structuring Si in arrays of vertical high aspect ratio pillars, ranging from nanoscale to macroscale feature dimensions, is essential for producing functional interfaces for many applications. Arrays of silicon 3D nanostructures are needed to realize photonic and phononic crystals, waveguides, metalenses, X-ray wavefront sensors, detectors, microstructures and arrays of Si pillars are used as bio-interfaces in neural activity recording, cell culture, microfluidics, sensing and on-chip manipulation. Here, we present a new strategy for realizing arrays of protruding sharp Si nanopillars using displacement Talbot lithography combined with metal-assisted chemical etching (MacEtch) in gas phase. With the double exposure of a linear grating mask in orthogonal orientations and the lift-off technique, we realized a catalyst pattern of holes in a Pt thin film with a period of 1 {\mu}m and hole diameter in the range of 100-250 nm. MacEtch in gas phase by using vapor HF and oxygen from air allows to etch arrays of protruding Si nanopillars 200 nm-thick and aspect ratio in the range of 200 (pillar height/width) with an etching rate up to 1 {\mu}m/min. With the advantage of no stiction, no ion beam damage of the Si substrate, nanometric resolution and high fidelity of pattern transfer the method is an easy-to-scale-up processing that can support the fabrication of Si pillars arrays for many valuable applications both at micro and nano-scale.

High Aspect Ratio Dry Etching of AlGaAs by Segmented Processing and In-Situ Sidewall Passivation

Fabrication of Submicrometer Inp Pillars by Colloidal Lithography and Dry Etching

Dry etching of deep air holes in GaAs/AlGaAs-based epi-wafer having InAs quantum dots for fabrication of photonic crystal laser

High Aspect Ratio Etching of Nanopores in PECVD SiC Through AAO Mask

Fabrication of high-aspect-ratio double-slot photonic crystal waveguide in InP heterostructure by inductively coupled plasma etching using ultra-low pressure

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

Deep Groove Etching for Partial Reflectors in InP-based Monolithically Integrated Photonic Devices

Fabrication of micro hole array on the surface of CVD ZnS by scanning ultrafast pulse laser for antireflection

Small-feature-size Etching of InP/InGaAsP by Inductively Coupled Plasma at Ultra-Low Pressure

Deep InP gratings for opto-electronic devices etched by Cl 2/CH 4/Ar inductively coupled plasma

Etching mechanism of high-aspect-ratio array structure

The study and optimization of ICP deep etching at a low-temperature for InP solid-immersion metalens fabrication

Wafer-Scale Fabrication of Ultra-High Aspect Ratio, Microscale Silicon Structures with Smooth Sidewalls Using Metal Assisted Chemical Etching

Fabrication of ultrahigh-aspect-ratio and periodic silicon nanopillar arrays using dislocation lithography and deep reactive-ion etching

Fabrication High Aspect Ratio Nanometer Holes on the Alumina Based on Self-Organization Technology

Deep reactive ion etching of cylindrical nanopores in silicon for photonic crystals

Smooth and Vertical Etching of GaAs/GaInP/AlGaInP Using Inductively Coupled Cl2/BCl3/CH4 Plasma

Deep InP Gratings for Opto-Electronic Devices Etched by Cl <sub>2</sub> /CH <sub>4</sub> /Ar Inductively Coupled Plasma

High aspect ratio arrays of Si nano-pillars using displacement Talbot lithography and gas-MacEtch

Fabrication of High Aspect Ratio Structure and Its Releasing for Silicon on Insulator Mems/Moems Device Application