Abstract:The user demands for Lithium ion batteries in mobile applications and electric vehicles request steady improvement in terms of capacity and cycle life. State-of-the-art lithium ion batteries irreversibly loose about 10 % of the capacity during the first cycles due to SEI formation. Therefore, 10 % of the cathode material is not used during the rest of the cells life which results in a waste of cathode material and leads to a lowered range of battery electric vehicles. Therefore, these losses must be compensated to ensure efficient resource utilization and to further increase the capacity of the lithium ion battery. We have developed a method to compensate these capacity losses by pre-lithiation: A fast and simple approach of electrolyte-free direct contact pre-lithiation leads to targeted degrees of pre-lithiation in a range of 7-50 % for state-of-the-art graphite electrodes. The parameters pressure (0-40 MPa), temperature (20-150°C) and time (0-60 min) are used to transfer lithium from a temporary substrate to the graphite anode. This process uses 1-5 μm thin lithium films made by the Fraunhofer IWS lithium melt deposition process as a lithium source. [1] The degree of pre-lithiation can be controlled by the lithium loading of the temporary substrate. NCM full cells built with pre-lithiated graphite electrodes where electrochemically evaluated in comparison to unlithiated electrodes. They show 6.5 % capacity increase after the first cycles using the additional lithium to form the SEI during the first cycles. The parameter influence of the pre-lithiation process on the initial coulomb efficiency of cells with pre-lithiated graphite electrodes is examined in half cells showing an ICE of 99.91 % for the best parameters. This method of electrolyte-free direct contact pre-lithiation shows an efficient way to further increase the capacity of state-of-the-art LIBs with graphite electrodes by increasing the cathode material utilization. It can potentially be scaled up to a roll-to-roll process using a heated calender nip. The temporary substrates with tailored lithium loading can be processed by lithium melt deposition in an efficient way with high lithium yield and high precision. [1] K. Schönherr, B. Schumm, F. Hippauf, R. Lissy, H. Althues, C. Leyens, S. Kaskel, Chemical Engineering Journal Advances 2022 , 9 , 100218. Figure 1

Roll-to-roll Prelithiation of Lithium-Ion Battery Anodes by Transfer Printing

Non-destructive Chemical Prelithiation of VO2(B) Anodes Constructing a Multifunctional Interphase Layer for Advanced Li-Ion Batteries

Application of Thin Lithium Foil for Direct Contact Prelithiation of Anodes within Lithium-Ion Battery Production

Direct Contact Prelithiation of Multi-Layered Lithium-Ion Battery Pouch Cells Using a Scalable Prelithiation Process

Lithiophilic Chemistry Facilitated Ultrathin Lithium for Scalable Prelithiation

Tailored Pre-Lithiation of Carbon Anodes Using Melt Deposited Thin Lithium

Prelithiation: A Critical Strategy Towards Practical Application of High‐Energy‐Density Batteries

Roll-to-roll fabrication of lithium metal anodes with hierarchical lithiophilic structures and controlled deposition for enhanced stability

Achieving Desirable Initial Coulombic Efficiencies and Full Capacity Utilization of Li‐Ion Batteries by Chemical Prelithiation of Graphite Anode

Prelithiation: A Crucial Strategy for Boosting the Practical Application of Next-Generation Lithium Ion Battery

Non-destructive chemical prelithiation of VO 2 (B) anodes constructing a multifunctional interphase layer for advanced Li-Ion batteries

Controlled roll to roll pre-lithiation by lithium vacuum vapor deposition for high performance silicon based lithium-ion battery

Practical evaluation of prelithiation strategies for next‐generation lithium‐ion batteries

Rolling Press of Lithium with Carbon for High-Performance Anodes

Sustainable Prelithiation Strategy: Enhancing Energy Density and Lifespan with Ultrathin Li‐Mg‐Al Alloy Foil (adv. Energy Mater. 29/2024)

High-capacity battery cathode prelithiation to offset initial lithium loss

A Large-Area Lithium Metal-Carbon Nanotube Film for Precise Contact Prelithiation in Lithium-Ion Batteries

A Scalable and Controllable Li‐powder‐coating Pre‐lithiation Method toward Ultra‐long‐life and High‐energy‐density LiFePO4 Battery

Large‐Scale Manufacturing of Pattern‐Integrated Paper Li‐Ion Microbatteries through Roll‐to‐Roll Flexographic Printing

Cryogenic Mechanical Prelithiation Reduces Porosity and Improves Battery Performance of an Alloy Foil Anode

Large-Area Lithium Metal-Carbon Nanotube Film for Precise Contact Prelithiation in Lithium-ion Batteries