Abstract:Crystalline silicon as an anode material for lithium-ion batteries (LIBs) has a theoretical capacity greater than 3600 mAh/g, an order of magnitude larger than the current anode materials of choice, graphite (~370 mAh/g). However, the use of silicon is hampered by several issues that hinder its widespread usage in LIBs. Chief among these is the large volume expansion that accompanies lithiation (>300%), which results in the self-pulverization of silicon during cycling and the degradation in stability and performance that accompanies it. Silicon also suffers from active lithium loss in its first cycle from the formation of Li x Si and the solid-electrolyte interphase (SEI), which irreversibly consumes lithium and decreases gravimetric/volumetric capacity (typically >20% capacity loss after the formation cycle). This capacity loss coupled with mechanical and chemical degradation leads to poor capacity retention and short cycle life. Pre-lithiation of silicon and other potential anode materials ( e.g. SiO x ), a process of inserting additional Li into Si prior to battery operation, is thus desired to compensate for lithium consumption and to maintain the high capacity associated with silicon. Here, we demonstrate a simple and scalable method for the ex situ ( i.e. outside the cell) electrochemical synthesis of pre-lithiated silicon. In this method, a current is driven though an electrochemical stir-tank reactor composed of Si powder in electrolyte suspension and a Li containing anode. When Si particles contact the conductive inner surface of the reaction vessel, lithium ions in the electrolyte are reduced on the surface to form lithium-silicon compounds. The degree of lithiation is controlled by the applied current density, applied voltage, and/or runtime. This talk will describe the chemical and structural characteristics of pre-lithiated silicon synthesized with this technique, basic electrochemical properties of our lithiated material, and the specific advantages presented by the method vs other methods.

Controlled roll to roll pre-lithiation by lithium vacuum vapor deposition for high performance silicon based lithium-ion battery

A Convenient and Versatile Method to Control the Electrode Microstructure Toward High-Energy Lithium-Ion Batteries

Pre-Lithiating SiO Anodes for Lithium-Ion Batteries by a Simple, Effective, and Controllable Strategy Using Stabilized Lithium Metal Powder

Regulation of Si Nanodomain Size and Its Effect on Electrochemical Performance in Prelithiated SiO Anode

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Pre-lithiation synergized with magnesiothermic reduction to enhance the performance of SiO anode for advanced lithium-ion batteries

Chemical Pre-lithiation of SiO x Anodes with a Weakly Solvating Solution of Polycyclic Aromatic Hydrocarbons for Lithium-Ion Batteries

Non-destructive Chemical Prelithiation of VO2(B) Anodes Constructing a Multifunctional Interphase Layer for Advanced Li-Ion Batteries

Controlled Prelithiation of Silicon Monoxide for High Performance Lithium-Ion Rechargeable Full Cells

Boosting the initial coulombic efficiency for SiO anodes through component controlling and microcrystalline size limiting regulated by carbon layer

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

(Digital Presentation) Approaches of Pre-Lithiation on Si Anode for Lithium-Ion Batteries

Lithium Pre-Storage Enables High Initial Coulombic Efficiency and Stable Lithium-Enriched Silicon/Graphite Anode.

The facile preparation and performances of prelithiated silicon oxide anode materials

(Digital Presentation) Ex Situ Electrochemical Pre-Lithiation of Silicon for Lithium-Ion Battery Anodes

Chemical Preinsertion of Lithium: an Approach to Improve the Intrinsic Capacity Retention of Bulk Si Anodes for Li-ion Batteries.

Simultaneous Purification and Perforation of Low-Grade Si Sources for Lithium-Ion Battery Anode.

Li-Si alloy pre-lithiated silicon suboxide anode constructing a stable multiphase lithium silicate layer promoting Ion-transfer kinetics

Facilitating prelithiation of silicon carbon anode by localized high‐concentration electrolyte for high‐rate and long‐cycle lithium storage

Elucidating the Role of Prelithiation in Si-based Anodes for Interface Stabilization