Abstract:Silicon-based anodes are promising to replace graphite-based anodes for high-capacity lithium-ion batteries (LIB). However, the charge–discharge cycling suffers from internal stresses created by large volume changes of silicon, which form silicon-lithium compounds, and excessive consumption of lithium by irreversible formation of lithium-containing compounds. Consumption of lithium by the initial conditioning of the anode, as indicated by low initial coulombic efficiency (ICE), and subsequently continuous formation of solid-electrolyte-phase (SEI) on the freshly exposed silicon surface, are among the main issues. A high-performance, silicon-based, high-capacity anode exhibiting 88.8% ICE and the retention of 2 mAh/cm2 areal capacity after 200 discharge–charge cycles at the rate of 1 A/g is reported. The anode is made on a copper foil using a mixture of 70%:10%:20% by weight ratio of silicon flakes of 100 × 800 × 800 nm in size, Super P conductivity enhancement additive, and an equal-weight mixture of CMC and SBR binders. Pyrolysis of fabricated anodes at 700 °C in argon environment for 1 h was applied to convert the binders into a porous graphitic carbon structure that encapsulates individual silicon flakes. The porous anode has a mechanically strong and electrically conductive graphitic carbon structure formed by the pyrolyzed binders, which protect individual silicon flakes from excessive reactions with the electrolyte and help keep small pieces of broken silicon flakes together within the carbon structure. The selection and amount of conductivity enhancement additives are shown to be critical to the achievement of both high-ICE and high-capacity retention after long cycling. The Super P conductivity enhancement additive exhibits a smaller effective surface area where SEI forms compared to KB, and thus leads to the best combination of both high-ICE and high-capacity retention. A silicon-based anode exhibiting high capacity, high ICE, and a long cycling life has been achieved by the facile and promising one-step fabrication process.

Facilitating prelithiation of silicon carbon anode by localized high‐concentration electrolyte for high‐rate and long‐cycle lithium storage

Li+ Solvation Structure Modification in Chemical Prelithiation Enabling Spatially Homogeneous Sei Toward High Performance Siox Anode

Impact of Electrolyte on Direct-Contact Prelithiation of Silicon-Graphite Anodes in Lithium-Ion Cells with High-Nickel Cathodes

Lithium Pre-Storage Enables High Initial Coulombic Efficiency and Stable Lithium-Enriched Silicon/Graphite Anode.

Fast and Scalable Complete Chemical Prelithiation Strategy for Si/C Anodes Enabling High-Performance LixSi–S Full Cells

A Uniform Self‐Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable‐Cycling Anodes in Lithium‐Ion Batteries

Fast and Scalable Complete Chemical Prelithiation Strategy for Si/C Anodes Enabling High-Performance Li x Si–S Full Cells

A Scalable Cathode Chemical Prelithiation Strategy for Advanced Silicon-Based Lithium Ion Full Batteries.

In Situ Constructing of Rigid‐Soft Coupling Solid–Electrolyte Interphase on Silicon Electrode toward High‐Performance Lithium Ion Batteries

Enabling the Transport Dynamics and Interfacial Stability of Porous Si Anode Via Rigid and Flexible Carbon Encapsulation for High-Energy Lithium Storage

High-ICE and High-Capacity Retention Silicon-Based Anode for Lithium-Ion Battery

A scalable silicon/graphite anode with high silicon content for high-energy lithium-ion batteries

Artificial Solid Electrolyte Interphase Coating to Reduce Lithium Trapping in Silicon Anode for Highly Stable Lithium Storage

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries

Scalable Layer-by-Layer Stacking of the Silicon-Graphite Composite: Prelithiation Strategy of the High-Capacity Anode for Energy/Power-Dense Li Batteries

Enhanced Silicon Anodes with Robust SEI Formation Enabled by Functional Conductive Binder

High‐Performance Silicon Anodes Enabled By Nonflammable Localized High‐Concentration Electrolytes

Efficient Chemical Prelithiation with Modificatory Li+ Solvation Structure Enabling Spatially Homogeneous SEI toward High Performance SiOx Anodeâ€

2D Solid‐Electrolyte Interphase Built by High‐Concentration Polymer Electrolyte for Highly Reversible Silicon Anodes

Elucidating the Role of Prelithiation in Si‐based Anodes for Interface Stabilization

Li-Si alloy pre-lithiated silicon suboxide anode constructing a stable multiphase lithium silicate layer promoting Ion-transfer kinetics