Abstract:Two commercialized solid additives thieno[3,2‐b]thiophene (TT) and 3,6‐dibromothieno[3,2‐b]thiophene (TTB) are used to delicately regulate the blend film packing and crystallinity. High efficiencies of 17.75% with impressive thermal stability (T80 > 2800 h, 65 °C) and excellent photostability are achieved for TT‐treated PM6:Y6 devices and a significantly higher PCE of 18.3% is achieved employing D18:L8‐BO. Delicately manipulating nanomorphology is recognized as a vital and effective approach to enhancing the performance and stability of organic solar cells (OSCs). However, the complete removal of solvent additives with high boiling points is typically necessary to maintain the operational stability of the device. In this study, two commercially available organic intermediates, namely thieno[3,2‐b]thiophene (TT) and 3,6‐dibromothieno[3,2‐b]thiophene (TTB) are introduced, as solid additives in OSCs. The theoretical simulations and experimental results indicate that TT and TTB may exhibit stronger intermolecular interactions with the acceptor Y6 and donor PM6, respectively. This suggests that the solid additives (SAs) can selectively intercalate between Y6 and PM6 molecules, thereby improving the packing order and crystallinity. As a result, the TT‐treated PM6:Y6 system exhibits a favorable morphology, improved charge carrier mobility, and minimal charge recombination loss. These characteristics contribute to an impressive efficiency of 17.75%. Furthermore, the system demonstrates exceptional thermal stability (T80 > 2800 h at 65 °C) and outstanding photostability. The universal applicability of TT treatment is confirmed in OSCs employing D18:L8‐BO, achieving a significantly higher PCE of 18.3%. These findings underscore the importance of using appropriate solid additives to optimize the blend morphology of OSCs, thereby improving photovoltaic performance and thermal stability.

Approaching 19% Efficiency and Stable Binary Polymer Solar Cells Enabled by a Solidification Strategy of Solvent Additive

Developing an efficient thiophene additive for 18.53% efficiency of binary polymer solar cells by adopting asymmetric strategy

Isomerized Green Solid Additive Engineering for Thermally‐Stable and Eco‐Friendly All‐Polymer Solar Cells with Approaching 19% Efficiency

High performance all-polymer solar cells enabled with solvent and solid dual additives

Asymmetrified Benzothiadiazole-Based Solid Additives Enable All-Polymer Solar Cells with Efficiency Over 19

Multifunctional Solid Additive Enabling All-Polymer Solar Cells with Improved Efficiency, Photostability and Mechanical Durability

Solid Additive Tuning Polymer Blend Morphology Enables Non-halogenated-solvent All-polymer Solar Cells with Efficiency over 17%

Binary All‐polymer Solar Cells with a Perhalogenated‐Thiophene‐Based Solid Additive Surpass 18% Efficiency

Toluene Processed All‐Polymer Solar Cells with 18% Efficiency and Enhanced Stability Enabled by Solid Additive: Comparison Between Sequential‐Processing and Blend‐Casting

Synergistic Effects of Solid and Solvent Additives on Film Morphology Enable Binary Organic Solar Cells with Efficiency of Over 19%

Gradual Optimization of Molecular Aggregation and Stacking Enables Over 19% Efficiency in Binary Organic Solar Cells

Nonfullerene Acceptors with Enhanced Solubility and Ordered Packing for High-Efficiency Polymer Solar Cells

Performance improvement of polymer solar cells with binary additives induced morphology optimization and interface modification simultaneously

19.0% Efficiency Binary Organic Solar Cells Enabled by Using a Building Block As Solid Additive

Integrated Omnidirectional Design of Non‐volatile Solid Additive Enables Binary Organic Solar Cells with Efficiency Exceeding 19.5%

Solid additive engineering enables high-efficiency and eco-friendly all-polymer solar cells

Solid Additive Modulates Acceptor Crystallization to Achieve 19.11% Efficiency and High Storage Stability in Organic Solar Cells

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2‐b]thiophene Additive

Boosting The Efficiency Of Ptb7-Th:Pc71bm Polymer Solar Cells Via A Low-Cost Halogen-Free Supramolecular Solid Additive

Morphology Optimization by Non‐Halogenated and Twisted Volatile Solid Additive for High‐Efficiency Organic Solar Cells

10.8% Efficiency Polymer Solar Cells Based on PTB7‐Th and PC71BM Via Binary Solvent Additives Treatment