Abstract:Background: It is well known the PTB7:PC71BM based photovoltaic cells have drawn great attention because the devices now hold the record in PSC performance. However, the crystallinity level of the used materials was reported very low, and this was tested with X-ray diffraction. It was reported that crystalline portions of the component enable a high absorption and a balanced charge transportation. As regards the phenomenon, the impact of the additive 1,8-diiodooctane (DIO) on the device performance has been reported in many references. In the work, the impact of solvent additive DIO, on the morphology formation and performance of PTB7:PC71BM:F8BT (poly[(9,9-di-noctylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3] thiadiazol-4,8-diyl)]) ternary PSCs was investigated.Methods: Researches related to ternary PSCs were reviewed, and many repeatable experiments have been done. To analyze the effect of DIO on the PTB7: PC71BM: F8BT based ternary cells, we did many measurements such as absorption spectral, PL spectral, device performance, X-ray Diffraction (XRD) and Atomic Force Microscopy (AFM).Results: It was found that the additive plays an important role in controlling the active layers morphology of the ternary devices. When 3% described solvent additive was added to solvent CB, an increasing nearly 36% in JSC and a relatively modest 41% gain in the FF were found, which resulting in a nearly doubling of the PCE. In order to analyze the influence of additive on the device performance, morphology characterization of PTB7: PC71BM: F8BT ternary layers was elucidated using AFM and energy transport progress of the devices was probed from photoluminescence spectra.Conclusion: In summary, we have successfully constructed the polymer ternary BHJ devices based on PTB7: PC71BM: F8BT with a nearly doubling of the PCE compared to CB fabricated ternary devices. By analyzing the absorption spectral, surface morphology, energy transfer progress and external quantum efficiency, we found that DIO as solvent additive can favor the charge separation into the charge transfer state after exciton dissociation. In more detail, an effective morphology in CB+DIO film can be obtained that provides a plentiful interfacial area for charge generation and a balanced percolation way for charge transfer, which resulting in a nearly doubling of the PCE. This study provides method to improve morphology of active films, and thus improve the performance for ternary PSCs.

Boosting The Efficiency Of Ptb7-Th:Pc71bm Polymer Solar Cells Via A Low-Cost Halogen-Free Supramolecular Solid Additive

Significantly Boosting Efficiency of Polymer Solar Cells by Employing a Nontoxic Halogen-Free Additive

Solid Additive Tuning Polymer Blend Morphology Enables Non-halogenated-solvent All-polymer Solar Cells with Efficiency over 17%

10.8% Efficiency Polymer Solar Cells Based on PTB7‐Th and PC71BM Via Binary Solvent Additives Treatment

Alkanedihalides Additives for Morphology Control of PTB7:PC71BM-based Polymer Solar Cells

Suppressing Non-Radiative Loss Via a Low-Cost Solvent Additive Enables High-Stable All-Polymer Solar Cells with 16.13% Efficiency

Developing an efficient thiophene additive for 18.53% efficiency of binary polymer solar cells by adopting asymmetric strategy

Approaching 19% Efficiency and Stable Binary Polymer Solar Cells Enabled by a Solidification Strategy of Solvent Additive

Toluene Processed All‐Polymer Solar Cells with 18% Efficiency and Enhanced Stability Enabled by Solid Additive: Comparison Between Sequential‐Processing and Blend‐Casting

Toward High Efficiency Organic Photovoltaic Devices With Enhanced Thermal Stability Utilizing P3ht-B-P3pht Block Copolymer Additives

Morphology Optimization by Non‐Halogenated and Twisted Volatile Solid Additive for High‐Efficiency Organic Solar Cells

Hydrogen-Bonding Strategy to Optimize Charge Distribution of PC71BM and Enable a High Efficiency of 12.45% for Organic Solar Cells

The Novel Additive 1‐naphthalenethiol Opens a New Processing Route to Efficiency‐Enhanced Polymer Solar Cells

Enhanced efficiency in nonfullerene organic solar cells by tuning molecular order and domain characteristics

Enhanced Photovoltaic Performance by Modulating Surface Composition in Bulk Heterojunction Polymer Solar Cells Based on PBDTTT‐C‐T/PC71BM

Improved Efficiency and Stability in Polymer Solar Cells Using a Tetra-nuclear Zinc(II) Complex Interfacial Layer

Enhancing stability and performance of pseudo-planar heterojunction organic solar cells using a hindered phenolic antioxidant with over 19% efficiency

High Efficiency Polymer Solar Cells with Efficient Hole Transfer at Zero Highest Occupied Molecular Orbital Offset Between Methylated Polymer Donor and Brominated Acceptor.

Improving the Fill Factor of Perovskite Solar Cells by Employing an Amine-tethered Diketopyrrolopyrrole-Based Polymer as the Dopant-free Hole Transport Layer

Impact of Solvent Additive on Morphology of High-Efficiency Ternary Blend Solar Cell

Halogenation Strategy of Thiophene Derived Solvent Additives Enables Optimized Morphology for Organic Solar Cells with 19.17% Efficiency