Abstract:How processing solvents influence the overall photovoltaic performances of polymer solar cells (PSCs) remains unclear in various recently emerged new material systems. Here we systematically studied this issue by integrating an extensively used poly (3-hexylthiophene) (P3HT), or a recently developed conjugated polymer P2F-EHp, with different non-fullerene acceptors. The P3HT based devices processed with the non-halogenated solvent, 2-methylanisole in presence of 1-methylnaphthalene as solvent additive, exhibit reduced bimolecular and trap-assisted monomolecular recombination, facile charge extraction and enhanced charge carrier mobilities. Morphological investigation reveals that the optimizing crystallites, phase purity as well as nanofibrous structure is effective to the enhancement of charge generation and transport. Note that P3HT:O-IDTBR based devices processed with these non-halogenated solvents exhibit an impressive power conversion efficiency of 7.1% with a high fill factor of 75.09% on a device area of 0.05 cm2, and the efficiency remained 6.89% even in a device with large active layer area of 1 cm2 with promising thermal stability. It is also noted that efficient PSCs consisting of P2F-EHp and non-fullerene acceptors of IT-4F and IT-4Cl were developed via optimizing non-halogenated toluene:o-xylene co-solvent. The detailed investigation of film morphology demonstrated that the co-solvent appeared to assist the manipulation of crystal coherent lengths and effectively decrease the phase separation of the corresponding blend films. Of particular importance is that this material system is compatible with the low-cost blade-coating technique and can be processed under ambient conditions without post-treatment. A remarkable power conversion efficiency of 10.1% was achieved by blade-coating the P2F-EHp:IT-4F:IT-4Cl blends in air. The results indicated that using non-halogenated solvents is a promising candidate for constructing efficient PSCs toward practical applications.

Significantly Boosting Efficiency of Polymer Solar Cells by Employing a Nontoxic Halogen-Free Additive

Boosting The Efficiency Of Ptb7-Th:Pc71bm Polymer Solar Cells Via A Low-Cost Halogen-Free Supramolecular Solid Additive

Solid Additive Tuning Polymer Blend Morphology Enables Non-halogenated-solvent All-polymer Solar Cells with Efficiency over 17%

Suppressing Non-Radiative Loss Via a Low-Cost Solvent Additive Enables High-Stable All-Polymer Solar Cells with 16.13% Efficiency

Isomerized Green Solid Additive Engineering for Thermally‐Stable and Eco‐Friendly All‐Polymer Solar Cells with Approaching 19% Efficiency

Enhanced efficiency in nonfullerene organic solar cells by tuning molecular order and domain characteristics

Critical Role of Non-Halogenated Solvent Additives in Eco-Friendly and Efficient All-Polymer Solar Cells

Halogenation Engineering of Solid Additives Enables 19.39% Efficiency and Stable Binary Organic Solar Cells via Manipulating Molecular Stacking and Aggregation of Both Donor and Acceptor Components

The Novel Additive 1‐naphthalenethiol Opens a New Processing Route to Efficiency‐Enhanced Polymer Solar Cells

Morphology Optimization by Non‐Halogenated and Twisted Volatile Solid Additive for High‐Efficiency Organic Solar Cells

Binary All‐polymer Solar Cells with a Perhalogenated‐Thiophene‐Based Solid Additive Surpass 18% Efficiency

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2‐b]thiophene Additive

Developing an efficient thiophene additive for 18.53% efficiency of binary polymer solar cells by adopting asymmetric strategy

High performance all-polymer solar cells enabled with solvent and solid dual additives

Halogenation Strategy of Thiophene Derived Solvent Additives Enables Optimized Morphology for Organic Solar Cells with 19.17% Efficiency

Novel Brominated Compounds Using in Binary Additives Based Organic Solar Cells to Achieve High Efficiency over 10.3%

Approaching 19% Efficiency and Stable Binary Polymer Solar Cells Enabled by a Solidification Strategy of Solvent Additive

Nonfullerene Acceptors with Enhanced Solubility and Ordered Packing for High-Efficiency Polymer Solar Cells

Highly Electronegative Additives Suppress Energetic Disorder to Realize 19.19% Efficiency Binary Organic Solar Cells

Improving Efficiency of Non-Fullerene Polymer Solar Cells by Using Non-Halogenated Solvents

Simple benzothiadiazole-based small molecules as additives for efficient organic solar cells