Abstract:Fiber-optic sensors have numerous existing and emerging applications spanning areas from industrial process monitoring to medical diagnosis. Two of the most common fiber sensors are based on the fabrication of Bragg gratings or Fabry-Perot etalons. While these techniques offer a large array of sensing targets, their utility can be limited by the difficulties involved in fabricating forward viewing probes (Bragg gratings) and in obtaining sufficient signal-to-noise ratios (Fabry-Perot systems). In this article we present a micro-scale fiber-optic force sensor produced using direct laser writing (DLW). The fabrication entails a single-step process that can be undertaken in a reliable and repeatable manner using a commercial DLW system. The sensor is made of a series of thin plates (i.e. Fabry-Perot etalons), which are supported by springs that compress under an applied force. At the proximal end of the fiber, the interferometric changes that are induced as the sensor is compressed are read out using reflectance spectroscopy, and the resulting spectral changes are calibrated with respect to applied force. This calibration is performed using either singular value decomposition (SVD) followed by linear regression or artificial neural networks. We describe the design and optimization of this device, with a particular focus on the data analysis required for calibration. Finally, we demonstrate proof-of-concept force sensing over the range 0-50 mu N, with a measurement error of approximately 1.5 mu N. Published by The Optical Society under the terms of the Creative Commons Attribution 4.0 License.

Development of a Microforce Sensor Based on a Fiber Bragg Grating Used for Micro-/Nanomanipulation.

Design of a Microforce Sensing Gripper for Micro/Nano Manipulation Based on Optical Fiber Sensing

Micro-scale fiber-optic force sensor fabricated using direct laser writing and calibrated using machine learning.

High-Sensitivity Microfiber Strain and Force Sensors

Optical Nanofiber-Enabled Self-Detection Picobalance

Three-dimensional printed microcantilever with mechanical metamaterial for fiber-optic microforce sensing

Probe-Type Microforce Sensor for Mirco/Nano Experimental Mechanics

Microstructured Cantilever Probe on Optical Fiber Tip for Microforce Sensor

A nanonewton force sensor using a U-shape tapered microfiber interferometer

Recent Advances in Non-Contact Force Sensors Used for Micro/nano Manipulation

Ultra-small Microfiber Bragg Grating Force Sensor with Greater Sensitivity

Fiber‐integrated Force Sensor using 3D Printed Spring‐Composed Fabry‐Perot Cavities with a High Precision Down to Tens of Piconewton

Ultra-highly Sensitive Surface-Corrugated Microfiber Bragg Grating Force Sensor

Micro-Force Sensor Based On Photonic Crystal Cavity Interrogated By Fiber Loop Ring-Down Technology

A Temperature-Independent Force Transducer Using One Optical Fiber with Multiple Bragg Gratings.

A Fiber Bragg Grating Sensing-Based Micro-Vibration Sensor and Its Application

Nanoscale fiber-optic force sensors for mechanical probing at the molecular and cellular level

Design of a Modular 3-D Force Sensor with Fiber Bragg Gratings for Continuum Surgical Robot.

Sensing and Exploiting Static Femto-Newton Optical Forces by a Nanofiber with White-Light Interferometry

High-sensitive Optical Force Sensor Based on Enhanced Effective Index Modulation

Design and Modeling of A Novel Two Dimensional Nano-Scaled Force Sensor Based on Silicon Photonic Crystal