Abstract:3D monolithic integration of logic and memory devices has emerged as one of the key enablers for next-generation electronic devices to address the ever-increasing demand for higher integration density, better performance and energy efficiency. BEOL-compatible oxide semiconductors show great potential to revolutionize the field thanks to their unique properties [1]. We present our recent advancement related to BEOL-compatible oxide semiconductors for logic and memory applications. The digital-etch-enabled nanowire transistors and α -IGZO-based eDRAM will first be discussed, followed by the ferroelectric (FE) memories with high performance and novel structures utilizing α -IGZO or ALD-deposited ZnO as the channel. Ultra-scaled amorphous IGZO ( α -IGZO) nanowire field-effect transistors (NW-FETs) hold great potential for applications demanding high performance and integration density. To realize the fabrication of high-quality and aggressively-scaled nanowire structures, a novel digital etching method for amorphous α -IGZO materials has been proposed and demonstrated [2]. Confirmed by the SEM images of an α -IGZO nanowire before and after digital etching, a notable nanowire width W NW reduction can be observed. We have the thinnest α -IGZO nanowire achieved by the digital etching with a W NW of approximately 20 nm. By further developing the transistor upon the nanowire, the α -IGZO NW-FET attains a good subthreshold swing (SS) of 80 mV/decade and a high peak extrinsic transconductance ( G m, ext ) of 612 μS/μm at V DS of 2 V (456 μS/μm at V DS = 1 V). Compared to the previous studies, our IGZO NW-FET achieves one of the highest peak G m values among all IGZO-based FETs. Besides the BEOL compatibility and high on-current, ultra-low subthreshold leakage makes α -IGZO FETs extremely promising for eDRAM. We further investigated the potential of α -IGZO eDRAM by developing the charge-domain compute-in-memory (CiM) [3]. Experiments have demonstrated small SS, large on-state current, and long-time charge retention with our dedicated 4T1C memory cell. With differential cell structure, an even higher tolerance for charge loss can be attained. With experiment-calibrated benchmarking in the VGG-8 network for CIFAR-10 image classification tasks, 2092 TOPS/W power efficiency for the CiM core can be expected, outperforming the prior TFT and CMOS-based CiM approaches, exhibiting significant advantages for ultra-low-power applications. The integration of doped-HfO 2 FE material and oxide semiconductor, both BEOL-compatible with large-scale and cost-effective deposition, presents a promising avenue for advancing data storage in the future. We have developed the high-performance α -IGZO Fe-FET with a metal-ferroelectric-metal-oxide-semiconductor (MFMIS) structure as well as the Fe TCAM [4]. The α -IGZO Fe-FET achieves a large memory window of ~3 V with high reliability, while the Fe TCAM reduces the transistor number from 16 to 2 compared to the traditional SRAM-based one. Besides α -IGZO, we believe that ALD-based oxide semiconductors featuring high controllability of film thickness and conformal coverage of the 3D structures can create new opportunities for novel device structure and integration. The fin-gate ZnO Fe-FET stands for a great example while not only outstanding device performance but also suppressed device-to-device variation due to the unique structure have been demonstrated, holding tremendous promise for high-density 3D integration [5]. Acknowledgments: This work is supported by Singapore Ministry of Education (Tier 2: MOE2018-T2-2-154, Tier 1: R-263-000-D65-114). References : [1] S. Dutta et al. , IEDM, p. 36.4., 2020. [2] K. Han et al. , VLSI , 2021, p. T10-1. [3] J. Liu et al. , IEDM , 2021, p. 46.2. [4] C. Sun et al. , VLSI , 2021, p. T7-4. [5] Q. Kong et al. , IEDM , 2022, p. 12.3.

HfO2-Based Junctionless FeFET Array on FDSOI Platform for NAND Memory Applications

HfO 2 -based Junctionless FeFET Array on FDSOI Platform for NAND Memory Application

Computational Associative Memory with Amorphous Metal‐Oxide Channel 3D NAND‐Compatible Floating‐Gate Transistors

Downsizing and Memory Array Integration of Pt/Srbi2ta2o9/Hf-Al-O/Si Ferroelectric-Gate Field-Effect Transistors

Logic Compatible High-Performance Ferroelectric Transistor Memory

Understanding the Memory Window of Ferroelectric FET and Demonstration of 4.8-V Memory Window With 20-nm HfO2

HAO $+$ Al $_{\text{2}}$ O $_{\text{3}}$ FeFET Gate-Stack for Overall Improvement in Operating Voltage, Endurance, and Retention

3D Nano Hafnium‐Based Ferroelectric Memory Vertical Array for High‐Density and High‐Reliability Logic‐In‐Memory Application

Ge-based Non-Volatile Logic-Memory Hybrid Devices for NAND Memory Application

A ferroelectric fin diode for robust non-volatile memory

Stacked HZO/α-In 2 Se 3 Ferroelectric Dielectric/Semiconductor FET With Ultrahigh Speed and Large Memory Window

Solid-state non-volatile memories based on vdW heterostructure-based vertical-transport ferroelectric field-effect transistors

Oxide-semiconductor channel ferroelectric field-effect transistors for high-density memory applications: 3D NAND operation and the potential impact of in-plane polarization

A 3D Vertical-Channel Ferroelectric/Anti-Ferroelectric FET With Indium Oxide

A Novel High-Endurance FeFET Memory Device Based on ZrO 2 Anti-Ferroelectric and IGZO Channel

High Performance HfLaO-based TiO2-Channel FE V-NAND with High Consistency and Low Operation Voltage

Memory and Compute-in-Memory Based on Ferroelectric Field Effect Transistors

Dual-Ferroelectric-Coupling-Engineered Two-Dimensional Transistors for Multifunctional In-Memory Computing

High-performance non-volatile field-effect transistor memories using an amorphous oxide semiconductor and ferroelectric polymer

Ferroelectric Field-Effect Transistors for Logic and In-Situ Memory Applications

(Invited) BEOL-Compatible Oxide Semiconductor Logic and Memory Devices