Abstract:High-power pulse generators are widely used in civil and military fields. The main switch directly determines the output characteristics of the high-power pulse generators, such as the voltage front time (tf). Pseudospark switches (PSS) show a promising future for middle voltage, high repetitive frequency pulse power applications. However, how to further improve the breakdown behavior without reducing its advantages is a challenging task. In this paper, the influence of operating parameters (anode voltage UA and gas pressure p) and structural parameter (number of cathode holes) on the breakdown behavior are investigated, the related mechanism are explained, and specific improvement schemes are proposed. It is found that the tf of the single channel PSS (SCPSS) decreased significantly with increasing p, but hardly varied with UA under moderate p. However, it is not a sound solution to increase the p excessively to reduce tf. Besides, increasing the number of cathode holes can obtain a shorter tf at low pressures (which implies superior repetition frequency performance). However, at 25 Pa, the jitter (which is defined as the standard deviation of tf in multiple tests) of the 2-channel PSS is larger than that of the SCPSS. And the jitter of the 4-channel and 8-channel PSS is also greater than 6 ns and 2 ns, respectively. Through experimental and simulation analyses, it can be explained as the stepwise penetration of the virtual anode and the non-simultaneous ignition of the channels. A scheme to increase the trigger energy (ε) has been adopted to improve the simultaneous ignition probability, while shortening tf and reducing jitter. After optimization, the good ignition probability of the 4-channel PSS has been improved to 82% and the jitter has been reduced to less than 1 ns at 25 Pa and 14.7 mJ.

Probability Calculation Model for 1 + N-Type Multistage Gas Spark Switch with High Reliability and Compactness

Reliability Evaluation for Integrated Power-Gas Systems with Power-to-Gas and Gas Storages

Study of operation mode and breakdown characteristics for multi-stage gas switch

Calculation Model of Self-Breakdown Voltage Distribution in Gas Switches

An Improved Parametric Model for the Simulation of Trigatron Gas Switches

Numerical Calculation of Gas Breakdown in Ultrafast Gas Switch

A 1-MV Low-Jitter High-Reliability Multi-Stage Equal Breakdown Probability Gas Switch

Optimization of Self-Breakdown and Triggering Characteristics on Multigap Gas Switch by Mounting Resistors and Capacitors in Parallel with Switch Gaps

A Multi-State Model for Reliability Assessment of Integrated Gas and Power Systems Utilizing Universal Generating Function Techniques

Investigation on Breakdown Characteristics of a Pulsed Gas Switch and Influence of Pre-Ionization

Study on Firing Conditions of Multigap Gas Switch for Fast Linear Transformer Driver

Analysis and Enhancing of Self-Breakdown Voltages of A Multistage Gas Switch

Influence of Gap Distribution on Conduction Delay of Multigap Gas Switch

Numerical Modeling of Different Streamer Breakdown Modes of Gas Switch under the External Circuit

Influence factors and improvement scheme on the breakdown behavior of pseudospark switch

Study on Breakdown Stability of Gas Spark Switches

Experimental investigation and theoretical analysis of the breakdown time delay and jitter of multi-gap gas switch gaps

Lifetime Prediction of Field-distortion Gas Switch

Study on Multichannel Discharge Characteristics of Multigap Gas Switch Gaps

Analysis of the characteristics of gas insulated, multiple-stage, high voltage switches

Theoretical and Numerical Studies of Breakdown Phenomena Triggered by Microparticle in Nitrogen Gaps