Optimization of Self-Breakdown and Triggering Characteristics on Multigap Gas Switch by Mounting Resistors and Capacitors in Parallel with Switch Gaps
Hongyu Jiang,Fengju Sun,Peitian Cong,Zhiguo Wang,Xiaofeng Jiang,Jiahui Yin,Tao Huang,Weixi Luo,Tianyang Zhang,Rongxiao Zhai
DOI: https://doi.org/10.1109/tps.2019.2911563
IF: 1.368
2019-01-01
IEEE Transactions on Plasma Science
Abstract:The multigap gas switch has been widely used in liner transformer drivers (LTDs), but there is still room for improvement on its self-breakdown and triggering characteristics. In this paper, based on the circuit model of the six-gap gas switch, the gap voltage distribution during the charging and triggering process is analyzed, and the optimization on self-breakdown and triggering characteristics by mounting resistors and capacitors in parallel with switch gaps are theoretically and experimentally investigated. The results indicate that compared with the original switch, when the self-breakdown voltage is about +/- 90 kV, the standard deviation is reduced from 7.5 to less than 3 kV; for a charging voltage of +/- 80 kV and by operating at 60% working coefficient, when the negative trigger voltage is 75 kV, the jitter of the switch is reduced from 6.1 to 1.4 ns.