Abstract:High-pressure transportation and storage are the current main methods for storing hydrogen. Burst discs, which are common in high-pressure storage devices, can cause hydrogen leaks to ignite and create serious accidents when certain conditions are met. To investigate this, this paper studies the effect of different blasting slot shapes on the spontaneous combustion of leaked high-pressure hydrogen. Numerical simulations, using LES, EDC model, Ten-Step Burst Disc Opening Method and 19-Step Detailed Hydrogen Combustion Mechanism, were conducted to analyze the spontaneous combustion of hydrogen with annular grooves, star grooves, cross grooves and grooveless burst discs. The results of the study show that the shape of the groove in the bursting disc will significantly affect the shock wave structure and spontaneous combustion time of leaked high pressure hydrogen in the tube. Among the four types of bursting discs, the order of spontaneous combustion in the tube is annular groove (approximately 90 μs), star groove (approximately 110 μs), cross groove (approximately 120 μs), and grooveless bursting disc (approximately 130 μs). Secondly, the double spherical shock waves produced by annular groove bursting disc collide with each other, resulting in a higher rising speed of pressure and temperature in the tube than with other bursting discs. Finally, the spontaneous combustion time of the leaked hydrogen is proportional to the open area of the bursting disc. When the opening area is the same, the smaller the exit shape coefficient is, the shorter the spontaneous combustion time is. The research results can provide some reference for the design and application of bursting disc in high pressure hydrogen storage equipment.

Study on Effect and Mechanism of Pressure Rise Rate on the Bursting Pressure of Conventional Domed Bursting Disc

Research on Bursting Pressure Formula of Mild Steel Pressure Vessel

Influence of Moulding Pressure on the Burst Pressure of Reverse-Acting Rupture Discs

Theoretical and Experimental Research on Designed Bursting Pressure of Ultrahigh Pressure Rupture Disk

BURST FAILURE ANALYSIS OF PLASTIC ANISOTROPIC THICK-WALLED CYLINDRICAL VESSELS SUBJECTED TO COMBINED PRESSURES

Effects of fatigue and deformation on bursting pressure of conventional slotted blasting disc

Experiment and finite element analysis on pressure distention of laser welding dimple jacket

Theoretical and experimental study on sealing performance of a novel ultra-high pressure bursting disc

Analysis Study on the Bursting Disc of Overpressure Venting Device for Vacuum Vessel of EAST

Numerical study on the influence mechanism of different types of burst disc on high pressure hydrogen spontaneous combustion in tube

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

Investigation of Burst Pressure of Flat-Scored Metal Diaphragms in Hypersonic Impulse Facilities

An Enhanced Approach for Precise Determination of Burst Pressure in Steel Strip Reinforced Thermoplastic Pipes

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Dynamic Burst Pressure of Cylindrical Explosion Containment Vessels

Burst Pressure of Pipelines with Plastic Anisotropy under Combined Internal and External Pressures

Burst Pressure of Perforated-Steel Strip Composite Pipe

Prediction On Short-Term Burst Pressure Of Plastic Pipe Reinforced By Cross-Winding Steel Wires

Design and Experimental Research on Venting Device for Cryostat System of EAST

Experimental Investigation on Pressure Relief Mechanism of Specimens with Prefabricated Reaming Boreholes

Double Circular Arc Model Based on Average Shear Stress Yield Criterion and Its Application in the Corroded Pipe Burst