Abstract:Twist detection is of great significance in industrial production, aerospace, biomedicine, and other fields. Aiming at the problem of the low sensitivity of the twisted sensor, this article proposed and prepared a kind of fiber twist sensor with high sensitivity based on Sagnac interference. The sensitive area of the sensor is a helical elliptical-core polarization maintaining (HEPM) fiber, the optical fiber with an elliptical core has linear birefringence property, and when the fiber is rotated, it has circular birefringence property. The HEPM fiber is plugged into the light loop to form Sagnac interference. Since circular birefringence is proportional to the degree of fiber distortion, the interference spectral trough will respond to different angles of fiber torsion. In addition, the sensor can not only identify the twist direction but also maintain good stability in different twist directions. The experimental results show that the free spectral range (FSR) of the interference spectrum increases and the sensitivity of twist sensing increases as the length of the used HEPM fiber decreases. The maximum twist sensitivity that can be achieved is 8740.64 pm/(rad/m) when the length of HEPM fiber is 15 cm in the twist range of plus or negative 120°, which is higher than the sensitivity of existing studies. The proposed sensor can be used for high-sensitivity distortion sensing. The temperature stability of the sensor is studied experimentally, and a sensing matrix is established that can simultaneously measure the torsion and temperature to eliminate the error caused by temperature. In summary, the proposed sensor not only has high sensitivity but also has an excellent linear response and can identify the twist direction, which has great potential in practical distortion detection.

Highly Sensitive Torsion Sensor Based on Mach–Zehnder Interference in Helical Seven-Core Fiber Taper

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A Stable and Highly Sensitive Directional Torsion Sensor Based on a Helical Double Cladding Microstructured Multicore Fiber

Strain-insensitive micro torsion and temperature sensor based on a helical taper seven-core fiber structure

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Highly Sensitive Directional Torsion Sensor Based on a Helical Panda Fiber Taper

Highly sensitive torsion senor based on dual-side-hole fiber Mach-Zehnder interferometer

Highly Sensitive Torsion Sensor Based on Triangular-Prism-shaped Long-Period Fiber Gratings

An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber

Torsion and Temperature Sensor Based on Polished MSM Structure

High sensitivity torsion sensing MZI based on exciting the separation mode of graded index fiber

In-fiber torsion sensor based on dual polarized Mach-Zehnder interference

High-performance vector torsion sensor based on high polarization-dependent in-fiber Mach-Zehnder interferometer.

Highly Sensitive Bending Sensor Based on a Tapered Hollow Core Microstructured Optical Fiber

Axial strain and temperature sensor based on tapered seven-core fiber operating at dispersion turning point

High-Sensitivity Twist Sensor Based on Sagnac Interference With a Helical Elliptical Core Fiber

High-sensitivity and Low-Temperature Magnetic Field Sensor Based on Tapered Two-Mode Fiber Interference

High Sensitive Directional Torsion Sensor Based on a Segmented Long-Period Fiber Grating

Highly sensitive torsion sensor with femtosecond laser-induced low birefringence single-mode fiber based Sagnac interferometer

High Sensitivity Strain Sensors Using Four-Core Fibers through a Corner-Core Excitation