Abstract:A highly sensitive optical fiber torsion sensor with femtosecond laser-induced low birefringence SMF-based Sagnac interferometer (SI) is proposed and experimentally demonstrated in this paper. A straight-line waveguide positioned horizontally with respect to the fiber core is inscribed by the femtosecond laser in the cladding of the SMF, which leads to the asymmetry stress distribution in the SMF, and then gives rise to the low birefringence in the SMF. Compared with most of the previous reported SI based torsion sensors, there is no splicing joint in the femtosecond laser-induced low birefringence SMF-based SI, which lowers the transmission loss and makes the SI based torsion sensor more robust simultaneously. The experiment result shows that the proposed torsion sensor exhibits a torsion sensitivity of up to 3.2562 nm/degree, with the high torsion resolution of 0.003 degree. In contrast, the temperature cross-sensitivity and strain cross-sensitivity of the proposed torsion sensor are low, to -0.000055 degree/°C and 0.000013 degree/με, respectively, thus overcoming the cross-sensitivity problem resulting from temperature and strain. Moreover, theoretical analysis are carried out to compare with the experimental results to demonstrate the feasibility and good consistency.

Strain-insensitive micro torsion and temperature sensor based on a helical taper seven-core fiber structure

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Tapered Optical Fiber Sensing Technology

High-Sensitivity Microfiber Strain and Force Sensors

Torsion and Temperature Sensor Based on Polished MSM Structure

A Stable and Highly Sensitive Directional Torsion Sensor Based on a Helical Double Cladding Microstructured Multicore Fiber

Highly Sensitive Torsion Sensor Based on Triangular-Prism-shaped Long-Period Fiber Gratings

Axial strain and temperature sensor based on tapered seven-core fiber operating at dispersion turning point

Temperature and Strain Sensor Based on a Few-Mode Photonic Crystal Fiber

A fiber-based torsion sensor with tunable sensitivity

In-fiber Torsion and Temperature Measurement Based on Femtosecond-Laser-inscribed Eccentric Fiber Bragg Grating

An optical torsion fiber sensor with simultaneous direction and angle measurement

Low Refractive-Index and Temperature Sensitive Torsion Sensor Based on Cascaded Long-Period Fiber Gratings Inscribed in a Four-Mode Fiber

High Sensitive Directional Torsion Sensor Based on a Segmented Long-Period Fiber Grating

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber

Highly Sensitive Directional Torsion Sensor Based on a Helical Panda Fiber Taper

Highly sensitive torsion senor based on dual-side-hole fiber Mach-Zehnder interferometer

Optical Fiber Temperature and Torsion Sensor Based on Lyot-Sagnac Interferometer.

Optical Fiber Sensor for Temperature and Strain Measurement Based on Multimode Interference and Square-Core Fiber

Cross-Sensitivity-Free Highly Sensitive Torsion and Strain Sensor Based on Concatenated DTP-Customizable Helical Fiber Gratings

Highly sensitive torsion sensor with femtosecond laser-induced low birefringence single-mode fiber based Sagnac interferometer