Abstract:Twist detection is of great significance in industrial production, aerospace, biomedicine, and other fields. Aiming at the problem of the low sensitivity of the twisted sensor, this article proposed and prepared a kind of fiber twist sensor with high sensitivity based on Sagnac interference. The sensitive area of the sensor is a helical elliptical-core polarization maintaining (HEPM) fiber, the optical fiber with an elliptical core has linear birefringence property, and when the fiber is rotated, it has circular birefringence property. The HEPM fiber is plugged into the light loop to form Sagnac interference. Since circular birefringence is proportional to the degree of fiber distortion, the interference spectral trough will respond to different angles of fiber torsion. In addition, the sensor can not only identify the twist direction but also maintain good stability in different twist directions. The experimental results show that the free spectral range (FSR) of the interference spectrum increases and the sensitivity of twist sensing increases as the length of the used HEPM fiber decreases. The maximum twist sensitivity that can be achieved is 8740.64 pm/(rad/m) when the length of HEPM fiber is 15 cm in the twist range of plus or negative 120°, which is higher than the sensitivity of existing studies. The proposed sensor can be used for high-sensitivity distortion sensing. The temperature stability of the sensor is studied experimentally, and a sensing matrix is established that can simultaneously measure the torsion and temperature to eliminate the error caused by temperature. In summary, the proposed sensor not only has high sensitivity but also has an excellent linear response and can identify the twist direction, which has great potential in practical distortion detection.

Highly Sensitive Directional Torsion Sensor Based on a Helical Panda Fiber Taper

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Coiling an Optical Fiber for Long-Range Dynamic Displacement and Force Sensing

Highly Sensitive Torsion Sensor Based on Triangular-Prism-shaped Long-Period Fiber Gratings

A Stable and Highly Sensitive Directional Torsion Sensor Based on a Helical Double Cladding Microstructured Multicore Fiber

Highly sensitive torsion senor based on dual-side-hole fiber Mach-Zehnder interferometer

High Sensitive Directional Torsion Sensor Based on a Segmented Long-Period Fiber Grating

Tapered Optical Fiber Sensing Technology

High-Sensitivity Twist Sensor Based on Sagnac Interference With a Helical Elliptical Core Fiber

Novel Fiber Optic Polarimetric Torsion Sensor Based on Polarization-Maintaining Photonic Crystal Fiber

High Torsion Sensitivity Sensor Based on LPFG With Unique Geometric Structure

FFT Algorithm-Assisted Polarimetric Twist Sensor

Strain-insensitive micro torsion and temperature sensor based on a helical taper seven-core fiber structure

A fiber-based torsion sensor with tunable sensitivity

Direction-Discriminating torsion sensor based on optical fiber Mach-Zehnder interferometer

An optical torsion fiber sensor with simultaneous direction and angle measurement

Twist-Direction-Discriminable Torsion Sensor Using Long-Period Fiber Grating Inscribed on Polarization-Maintaining Photonic Crystal Fiber

Low Refractive-Index and Temperature Sensitive Torsion Sensor Based on Cascaded Long-Period Fiber Gratings Inscribed in a Four-Mode Fiber

Cross-Sensitivity-Free Highly Sensitive Torsion and Strain Sensor Based on Concatenated DTP-Customizable Helical Fiber Gratings

Simultaneous measurement of directional torsion and temperature by using a DC-sampled helical long-period fiber grating

Helical Long-Period Gratings in Three-Core Fiber for Directional Curvature and Torsion Measurements