Abstract:Ethylene-Tetra-Fluoro-Ethylene (ETFE) cushions are popularly used in modern civil engineering struc-tures. When a cushion vibrates in uniform flow, the surrounding fluid will be driven to move along with it. The inertia of fluid then produces an action on the cushion, which is known as the effect of added mass. This effect is usually very significant due to the light weight of these cushions. This paper proposes a new method to estimate the added mass on a close-type ETFE cushion vibrating in uniform flow with an improved accuracy compared with methods in the literature. The aerodynamic force is assumed to con-sist of pressures from uniform flow and potential flow induced by perturbation of the vibrating cushion. An analytical expression for the added mass on the cushion is then proposed based on the Laplace equa-tion and Bernoulli equation, in which the velocity of the potential fluid above the vibrating cushion is assumed to vary along the z-direction in the form of a quartic function, and the non-uniform distribution of the added mass over the enveloping membrane is also considered. The proposed method is verified by comparing the dynamic responses of the cushion considering the added mass from the Computational Structural Dynamics (CSD) module of ADINA with those in the literature and those obtained from the fluid-structure interaction (FSI) analysis. The effects of different influencing factors on the accuracy of the method, e.g., side length of the cushion, initial inner pressure, wind velocity and wind direction angle, are further studied. Results show that: (a) the proposed method to estimate the added mass is more accu-rate than those in the literature with results closer to those from the FSI analysis; (b) an increase in the side length of the cushion will lead to a more non-uniform distribution of the added mass; (c) the side length of the cushion and wind velocity have a slight effect on the accuracy of the proposed method with the maximum error within 5%; and (d) an increase in the initial inner pressure can improve the accuracy of the proposed method while the wind direction angle seems to have little influence.(c) 2023 Elsevier Ltd. All rights reserved.

The Added Mass of a Closed-Type Cushion in Uniform Flow

Modeling of the Added Mass of Air on ETFE Cushions Vibrating in Still Air

Numerical analysis of added mass arising from fluid flow induced by vibration of three-dimensional structure

ETFE Air Cushion Membrane Configurations,Structural Performances and Material Properties Experiments

Study on the Fluid-Structure Interaction of ETFE Cushions Under Uniform Flow Field

Numerical Studies on the Air–Membrane Interaction of ETFE Cushions

EFFECT OF INFLATING AIR ON THE STATIC BEHAVIOR OF ETFE CUSHIONS

Numerical Simulation of Behaviors of Air-Inflated Cushion under Wind Excitation Based on Fluid-Structure Interaction

Experimental Evaluation on Structural Behaviors of ETFE Cushion Structures Subjected to Progressive Loading

Experimental Investigation on the Added Mass of Membranes Vibrating in Air

Static behavior of ETFE cushions under air-membrane interaction

Mechanical analysis and diaphragm effect of ETFE cushions

A Coupled Fluid-Structure Method In Load Analysis Of Air-Inflated Cushion Membrane Structure

Numerical analysis of added mass for open flat membrane vibrating in still air using the boundary element method

Study on Cushioning Characteristics of Soft Landing Airbag with Elastic Fabric

Numerical Analysis of the Performance of a Rectangular Floatation Cushion with High Stiffness for Pneumato-static Slideway

Virtual mass method for solution of dynamic response of composite cushion packaging system

Numerical analysis on the performance of a cushioned foundation with a mixture of both rigid and flexible piles

Numerical Investigation on Added Mass of Circle Membrane Vibrating in Still Air

Research on the Added Mass of Open-Type One-Way Tensioned Membrane Structure in Uniform Flow

Simulation study on the structure of the added air mass layer around a vibrating membrane