Abstract:The rigid pile composite foundation method is the most commonly used method for strengthening weak soil foundations. In this method, piles usually need to pass through weak soil layers, and the pile end falls on a bearing layer with good bearing capacity. Under existing technical conditions, the thicker the weak soil layer, the longer the pile body, and the more difficult it is to ensure the construction quality of the pile. In response to this issue, some scholars have adopted the rigid pile composite foundation method with a thick cushion layer for reinforcement treatment. This article uses PLAXIS 3D (V20.04.00.790) software to establish a finite element model of rigid pile composite foundation with a thick cushion layer and simulate the process of foundation reinforcement. The influence of parameters such as thickness, compression modulus, and shear strength index of the cushion layer on foundation settlement and pile–soil stress distribution is studied, and the reasonable range of these parameters is analyzed under the condition of considering reinforcement effect. Through comparative analysis, it can be concluded that for deep and weak soil areas, the thickness of the cushion layer can range from 0.5 to 2.6. The thickness and compressive modulus of the cushion layer have a significant impact on the settlement of the foundation, the pile–soil stress ratio, and the stress of the pile body, while the shear strength index of the cushion layer has a relatively small impact on these parameters. Reasonably selecting the geometric and mechanical parameters of the cushion layer can effectively reduce stress concentration at the pile top and better play the role of the soil between piles.

Study of Influence of Cushion on Settlement of Cement-Soil Mixing Pile Composite Foundation

Numerical Study of the Effect of Material Modulus Upon Cement-Soil Pile Composite Foundation

Numerical analysis on the performance of a cushioned foundation with a mixture of both rigid and flexible piles

In-situ test of bearing capacity behavior of composite foundation with rigid-flexible piles

Influences of different replacement ratios on composite foundation with rigid-flexible piles

Experimental Study on Behavior of Composite Foundation with Rigid-Flexible Piles

Test Research on the Behavior of Composite Foundations Incorporating Rigid and Flexible Piles

Finite Element Analysis of Deformation Characteristics of Composite Foundation with Rigid-Flexible Piles

Characteristic study on composite foundation with rigid-flexible piles under the load from embankment

Experimental Study on Effect of Cushion Thickness to Pile Soil Stress Ratio of CFG Composite Foundation

Design Mechanism of Cushion in CFG-pile Composite Foundation

Performance analysis of cast-in-place tubular pile composite ground under embankment load

Performance of Rigid-Flexible-Pile Foundation with Cushion

Settlement of composite ground reinforced by deformable piles

Engineering Characteristics Of Composite Foundation With Rigid-Flexible And Long-Short Piles

Field Test on Composite Foundation Incorporating Flexible and Rigid Piles

Research on the Reinforcement Characteristics of Thick Cushion Layer and Rigid Pile Composite Foundation

Research on In-Situ Tests of Pile Load Transfer Behaviors in Composite Foundation with Rigid-Flexible Piles

Practical Method for the Pile Composite Ground under Flexible Foundation Based on Super-Substructure Interaction

Consolidation Behavior of Cement- and Lime/cement-Mixed Column Foundations

Experimental Study Of The Rigid-Flexible Pile Composite Foundation