Mechanical Properties and Structural Performance of Etfe (Ethylene-Tetrafluoroethylene) Cushion Structures at Low Temperatures
Bing Zhao,Leiting Dong,Wujun Chen,Jianhui Hu,Zhenyu Qiu,Jinyu Zhou
DOI: https://doi.org/10.1016/j.engstruct.2017.01.031
2017-01-01
Abstract:ETFE (ethylene-tetrafluoroethylene) cushion structures have been widely used as building roofs and fa ades in recent years. However, mechanical behaviors and structural performance of ETFE cushions in cold regions have not been well-understood, which limits its applications in such regions. This paper is thus aimed to study the behaviors of ETFE cushion structures subjected to wind loads at low temperatures. To this end, a novel method of simulating static wind loads was proposed, by pumping out air from the load simulation chamber (LSC) and blowing air into the LSC, generating wind suction and pressure loads, respectively. These simulated wind loads were directly acted on the inner layers of the ETFE cushions in the normal direction. In this case, a corresponding experimental system, integrating ETFE cushion model, load simulation device, environment simulation subsystem, automatic pressure control subsystem and measurement subsystem, was designed and manufactured. Destructive tests of three ETFE cushion models were performed under progressive wind suction loads at 0 degrees C, 25 degrees C and 50 degrees C, respectively. Temperature, internal pressure, deformation, ultimate bearing capacity and failure mode were obtained and analyzed. Experimental results demonstrate that low temperature environment leads to smaller deformation, larger ultimate bearing capacity, larger failure stress and higher frangibility for the ETFE cushion structures. Such insights gained from experimental observations are useful for the analysis and optimal design of ETFE cushion structures in cold regions. (C) 2017 Elsevier Ltd. All rights reserved.