Abstract:Ethylene-Tetra-Fluoro-Ethylene (ETFE) cushions are popularly used in modern civil engineering struc-tures. When a cushion vibrates in uniform flow, the surrounding fluid will be driven to move along with it. The inertia of fluid then produces an action on the cushion, which is known as the effect of added mass. This effect is usually very significant due to the light weight of these cushions. This paper proposes a new method to estimate the added mass on a close-type ETFE cushion vibrating in uniform flow with an improved accuracy compared with methods in the literature. The aerodynamic force is assumed to con-sist of pressures from uniform flow and potential flow induced by perturbation of the vibrating cushion. An analytical expression for the added mass on the cushion is then proposed based on the Laplace equa-tion and Bernoulli equation, in which the velocity of the potential fluid above the vibrating cushion is assumed to vary along the z-direction in the form of a quartic function, and the non-uniform distribution of the added mass over the enveloping membrane is also considered. The proposed method is verified by comparing the dynamic responses of the cushion considering the added mass from the Computational Structural Dynamics (CSD) module of ADINA with those in the literature and those obtained from the fluid-structure interaction (FSI) analysis. The effects of different influencing factors on the accuracy of the method, e.g., side length of the cushion, initial inner pressure, wind velocity and wind direction angle, are further studied. Results show that: (a) the proposed method to estimate the added mass is more accu-rate than those in the literature with results closer to those from the FSI analysis; (b) an increase in the side length of the cushion will lead to a more non-uniform distribution of the added mass; (c) the side length of the cushion and wind velocity have a slight effect on the accuracy of the proposed method with the maximum error within 5%; and (d) an increase in the initial inner pressure can improve the accuracy of the proposed method while the wind direction angle seems to have little influence.(c) 2023 Elsevier Ltd. All rights reserved.

Numerical analysis of added mass arising from fluid flow induced by vibration of three-dimensional structure

Numerical Investigation on Added Mass of Circle Membrane Vibrating in Still Air

Analysis of Wind-induced Vibration Effects of a Funnel-shaped Open Membrane Structure

Numerical analysis of added mass for open flat membrane vibrating in still air using the boundary element method

Experimental Investigation on the Added Mass of Membranes Vibrating in Air

Added Mass Variation Effect on Vortex-Induced Vibration for Flexible Risers Based on Force-Decomposition Model

Added Mass of Beam Vibration on Fluid with Finite Amplitude

3D Analysis Method for Added Mass Matrix about Free Vibration of Structure in Water

Numerical Calculation of Additional Mass for Undersea Vehicle

Methods for Calculating Added Mass of Fabric Structures

Calculation of Finite Cylinder Radial Added-mass and Engineering Applications

Numerical Studies of Added Mass Based on the CFD Method

Simulation study on the structure of the added air mass layer around a vibrating membrane

Explanation for Fluid Effect on Flexural Vibration of a Finite Submerged Cylindrical Shell with Modal Added Mass

Identification of added mass according to frequency response function test data

Vibration characteristics of submerged structures based on singularity distribution method

Added-Mass Estimation of Flat Membranes Vibrating in Still Air

Numerical investigation of the added mass effect of submerged blade disk structures: From simplified models to Francis turbine runners

Air-induced Nonlinear Damping and Added Mass of Vertically Vibrating Bridge Deck Section Models under Zero Wind Speed

The Added Mass of a Closed-Type Cushion in Uniform Flow

Dynamic responses and time-frequency feature analysis for a fluid-structure coupling system with a variable mass tank