Abstract:In the past decades, silicon photonic integrated circuits (PICs) have been considered as a promising approach to solve the bandwidth bottleneck in optical communications and interconnections. Despite significant advances, large-scale PICs still face a series of technical challenges, such as footprint, power consumption, and routing state storage, resulting from the active tuning methods used to control the optical waves. These challenges can be partially addressed by combining chalcogenide phase change materials (PCMs) such as Ge2Sb2Te5 (GST) with silicon photonics, especially applicable in switching applications due to the nonvolatile nature of the GST. Although GST phase transitions between amorphous and crystalline states actuated by optical and electrical pulses heating have been experimentally demonstrated, there is no direct comparison between them. We carried out simulations and experiments to systematically investigate the difference in the phase change process induced by optical and electrical pulses for two types of Si-GST hybrid waveguides. For the phase transition induced by optical pulses, the device has a clear advantage in terms of power consumption and operation speed. For the phase transition induced by electrical pulses, the device is suitable for large-scale integration because it does not require complex light routing. It helps us better understand the phase change process and push forward the further development of Si-GST hybrid integration platform, bringing in new potential applications.

Comprehensive Investigation of Thermo-Optic Phase Shifters on a Multi-Layered SiN-on-SOI Platform

Efficient, Compact and Low Loss Thermo-Optic Phase Shifter in Silicon

Thermo-Optic Phase Shifter with Interleaved Suspended Design for Power Efficiency and Speed Adjustment.

Analysis of the Thermo-Optic Effect in Lateral-Carrier-injection SOI Ridge Waveguide Devices

High-efficiency Thermo-Optic Phase Shifter with Segment Heating Electrodes Based on High Index Contrast Silicon Oxide Waveguide

Highly integrated 3×3 silicon thermo-optical switch using a single combined phase shifter for optical interconnects.

Enhancement of Nonlinear Phase Shift for Format Conversion in Silicon Waveguides

Reversible Thermally Driven Phase Change of Layered In2Se3 for Integrated Photonics.

SiN-SOI Multilayer Platform for Prospective Applications at 2 Μm

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

The State-of-the-Art Phase-Change Integrated Photonic Devices With Electrically Driven Microheaters

Nonvolatile Electrically Reconfigurable Silicon Photonics Enabled by Back-End-of-line Integration of Phase Change Materials

Thermally Switchable/tunable Photonic Integrated Devices on Silicon

Low-loss and Power-Efficient Phase Shifter Based on an Optimized Multimode Spiral Silicon Waveguide.

Comparison of phase change process in Si-GST hybrid integrated waveguide and MMI devices

Monolithic back-end-of-line integration of phase change materials into foundry-manufactured silicon photonics

Theoretical Investigation of Polarization-Dependent Devices Based on the Critical Guiding Condition of Soi Waveguide

Research Progresses of SOI Optical Waveguide Devices and Integrated Optical Switch Matrix

Broadband Opto-Mechanical Phase Shifter for Photonic Integrated Circuits

Efficient and compact thermo-optic phase shifter in silicon-rich silicon nitride

Silicon Photonics Foundry Fabricated, Slow-Light Enhanced, Low Power Thermal Phase Shifter